Detail of GB 150.1~GB 150.4-2011

Introduction of GB 150.1~GB 150.4-2011

1 Scope This Part of GB 150 specifies the designation and the standard of steels that may be used for the pressure components of pressure vessels, the additional technical requirements of steels, and the application scope (temperature and pressure) and allowable stress of steels. This Part is applicable to the pressure vessels with design temperature during -253℃~800℃ and design pressure no larger than 35MPa. Inapplicable scope of this Part: inapplicable scope specified in GB 150.1; vessels in refrigeration industry and papermaking industry; enamelled vessels and simple pressure vessels; scope specified in Article 1.4 of TSG R0004. 2 Normative References The following documents are absolutely essential to the application of this Standard. For dated reference documents, only the dated versions apply to this Standard; for undated reference documents, the latest versions (including all amendments) apply to this Standard. GB 150.1-2011 Pressure Vessels-Part 1: General Requirements GB 150.3~2011 Pressure Vessels-Part 3: Design GB/T 228 Metallic Materials-Tensile Testing at Ambient Temperature GB/T 229 Metallic Materials-Charpy Pendulum Impact Test Method GB/T 699 Quality Carbon Structural Steels GB 713 Steel Plates for Boiler and Pressure Vessels GB/T 1220 Stainless Steel Bars GB/T 1221 Heat-resisting Steel Bars GB/T 3077 Alloy Structure Steels GB 3531 Low Alloy Steel Plates for Low Temperature Pressure Vessels GB/T 4226 Cold Finished Stainless Steel Bar GB/T 4334 Corrosion of Metals and Alloys - Test Methods for Intergranular Corrosion of Stainless Steels GB 5310 Seamless Steel Tubes and Pipes for High Pressure Boiler GB 6479-2000 Seamless Steel Tubes for High-pressure for Chemical Fertilizer Equipments GB/T 6803 Test Method for Drop-weight Test to Determine Nil-ductility Transition Temperature of Ferritic Steels GB/T 7735 Steel Tubes-The Inspection Method on Eddy Current Test GB/T 8163 Seamless Steel Tubes for Liquid Service GB 9948 Seamless Steel Tubes for Petroleum Cracking GB/T 12771 Welded Stainless Steel Pipes for Liquid Delivery GB 13296 Seamless Stainless Steel Tubes for Boiler and Heat Exchanger GB/T 14976 Stainless Steel Seamless Tubes for Fluid Transport GB 19189 Quenched and Tempered High Strength Steel Plates for Pressure Vessels GB/T 20878 Stainless and Heat-resisting Steels - Designation and Chemical Composition GB/T 21832 Austenitic - Ferritic (Duplex) Grade Stainless Steel Welded Tubes and Pipes GB/T 21833 Austenitic - Ferritic (Duplex) Grade Stainless Steel Seamless Tubes and Pipes GB 24511 Stainless Steel Plate, Sheet and Strip for Pressure Equipments GB/T 24593 Welded Austenitic Stainless Steel Tubes for Boiler and Heat-exchanger NB/T 47002.1 Explosion Welded Clad Plate for Pressure Vessels-Part 1: Stainless Steel-steel Clad Plate NB/T 47002.2 Explosion Welded Clad Plate for Pressure Vessels-Part 2: Nickel-steel Clad Plate NB/T 47002.3 Explosion Welded Clad Plate for Pressure Vessels-Part 3: Titanium-steel Clad Plate NB/T 47002.4 Explosive Welding Composite Plate for Pressure Vessels-Part 4: Copper-steel Clad Plate NB/T 47008 Carbon Steel and Alloy Steel Forgings for Pressure Equipments NB/T 47009 Low-alloy Steel Forgings for Low Temperature Pressure Equipments NB/T 47010 Stainless and Heat-resisting Steel Forgings for Pressure Equipments JB/T 4730.3 Nondestructive Testing of Pressure Equipments-Part 3: Ultrasonic Testing JB/T 4756 Nickel and Nickel Alloy Pressure Vessels TSG R0004 Supervision Regulation on Safety Technology for Stationary Pressure Vessel ISO 9328-2: 2004 Steel Flat Products for Pressure Purposes- Technical Delivery Conditions - Part 2: Non-alloy and Alloy Steels with Specified Elevated Temperature Properties 3 General 3.1 This standard gives the relevant provisions on the steels used for the steel plates, steel tubes and pipes, steel forgings and studs (including bolts) adopted by the pressure components of pressure vessels. The steels used for the non-pressure components that are welded with the pressure components shall adopt the steels with favorable weldability.

Contents of GB 150.1~GB 150.4-2011