1 Scope
This standard specifies the terms and definitions for the design, manufacture, renovation and application, extreme hazards and safety requirements and /or measures, inspectio and application information of the mechanical press tyep products (hereinafter referred to as press).
The standard is applicable to the design, manufacture, renovation and application of press and auxiliary device which is an integral part of the press, as well the the equipment integrated to automatic production line. This standard does not cover machines whose principle designed purpose is:
- sheet metal cutting by guillothine;
- attaching a fsterner, e.g. riveting;
- bending or folding;
- straightening;
- turret punch pressing;
- extruding;
- drop forging or heat drop stamping;
- compaction of metal powder;
- puching for the steel structure section bar processing
- spiral press
- the special puching designed for section bar blanking (e.g. steel structure)
2 Normative References
The following referenced documents are indispensable for the application of this document. For undated references, only the edition cited applies. For undated references, the latest editions of the normative documents (including all the amendments) are applicable to this document.
Contents
Foreword I
1 Scope
2 Normative References
3 Terms, Definitions and Abbreviations
4 Severe Hazard
5 Safety Requirements and/or Measures
5.1 Introduction
5.2 Basic Design Consideration
5.3 Mechanical Hazards in the Operation Danger Zone (Tools Zone)
5.4 Control and Monitoring System
5.5 Toolsetting, Trial Operation, Maintenance and Lubrication
5.6 Other Mechanical Hazards
5.7 Hazards Related to Slips, Trips and Falls
5.8 Other Hazards
6 Verification of the Safety Requirements and/or Measures
6.1 Inspection Method
6.2 Verification of the Safety Requirements and/or Measures
7 Applicaltion Information
7.1 Marking
7.2 Instruction Handbook
Appendix A (Normative) Interlocking Guard
Appendix B (Normative) Minimum Safety Distance
Appendix C (Informative) Installation Example of AOPD
Appendix D (Informative) Closed Tools
1 Scope
This standard specifies the terms and definitions for the design, manufacture, renovation and application, extreme hazards and safety requirements and /or measures, inspectio and application information of the mechanical press tyep products (hereinafter referred to as press).
The standard is applicable to the design, manufacture, renovation and application of press and auxiliary device which is an integral part of the press, as well the the equipment integrated to automatic production line. This standard does not cover machines whose principle designed purpose is:
- sheet metal cutting by guillothine;
- attaching a fsterner, e.g. riveting;
- bending or folding;
- straightening;
- turret punch pressing;
- extruding;
- drop forging or heat drop stamping;
- compaction of metal powder;
- puching for the steel structure section bar processing
- spiral press
- the special puching designed for section bar blanking (e.g. steel structure)
2 Normative References
The following referenced documents are indispensable for the application of this document. For undated references, only the edition cited applies. For undated references, the latest editions of the normative documents (including all the amendments) are applicable to this document.
Contents of GB 27607-2011
Contents
Foreword I
1 Scope
2 Normative References
3 Terms, Definitions and Abbreviations
4 Severe Hazard
5 Safety Requirements and/or Measures
5.1 Introduction
5.2 Basic Design Consideration
5.3 Mechanical Hazards in the Operation Danger Zone (Tools Zone)
5.4 Control and Monitoring System
5.5 Toolsetting, Trial Operation, Maintenance and Lubrication
5.6 Other Mechanical Hazards
5.7 Hazards Related to Slips, Trips and Falls
5.8 Other Hazards
6 Verification of the Safety Requirements and/or Measures
6.1 Inspection Method
6.2 Verification of the Safety Requirements and/or Measures
7 Applicaltion Information
7.1 Marking
7.2 Instruction Handbook
Appendix A (Normative) Interlocking Guard
Appendix B (Normative) Minimum Safety Distance
Appendix C (Informative) Installation Example of AOPD
Appendix D (Informative) Closed Tools
