Standard No.:	GB 4569-2026
English Name:	Limits and measurement methods for noise emitted by motorcycles （CHINA Ⅲ）
Chinese Name:	摩托车噪声限值及测量方法 （中国第三阶段）
Professional Classification:	GB    National Standard
Source Content Issued by:	SAMR; SAC
Issued on:	2026-02-27
Implemented on:	2029-1-1
Status:	to be valid
Superseding:	GB 16169-2005 Limit and measurement method of noise emitted by accelerating Motorcycles and Mopeds GB 4569-2005 Limit and measurement method of noise emitted by stationary Motorcycles and Mopeds
Target Language:	English
File Format:	PDF
Word Count:	25000 words
Translation Price(USD):	800.0
Delivery:	via email in 1~5 business day

National Standard of the People’s Republic of China GB 4569-2026 Replaces GB 4569-2005, GB 16169-2005 Limits and measurement methods for noise emitted by motorcycles (CHINA III) 摩托车噪声限值及测量方法 (中国第三阶段) (English translation) Issue date: 2026-02-12 Implementation date: 2029-01-01 Issued by the Ministry of Ecology and Environment of the People's Republic of China the State Administration for Market Regulation of the People's Republic of China 1 Scope of application This standard specifies the limit and measurement method for road driving noise and stationary noise emitted motorcycles and mopeds. This standard specifies the requirements and methods for type test of motorcycles and mopeds, production conformity as well as the inspection and judgment methods for in-use vehicles. This standard applies to motorcycles and mopeds, including those fitted with spark-ignition engines or compression-ignition engines, hybrid electric motorcycles and hybrid electric mopeds, and electric motorcycles and electric mopeds. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies. For other documents that are abolished, revised or revised by new documents, the new ones shall apply to this standard. GB/T 3785.1 Electroacoustics - Sound level meters - Part 1 : Specifications GB/T 5378 Methods of road test for motorcycles and mopeds GB/T 6003.1 Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values GB/T 15173 Electroacoustics - Sound calibrators GB/T 18385 Battery electric vehicles - Power performance - Test method GB/T 20076 Measurement methods of maximum torque and maximum net power of engines for motorcycles and mopeds GB/T 22157 Acoustics - Specification of test tracks for measuring noise emitted by road vehicles and their tyres HJ 1350 Technical specification for vehicle environmental information disclosure QC/T 792 Motors and controllers for electric motorcycles and electric mopeds 3 Terms and definitions For the purposes of this standard, the following terms and definitions apply. 3.1 vehicle of category L1, L2, L3, L4 and L5 Category L1: moped with two wheels mounted on the longitudinal center plane Category L2: moped with three wheels, one of which is located on the longitudinal center plane, and the other two wheels symmetrically arranged with respect to the longitudinal center plane Category L3: motorcycle with two wheels located on the longitudinal center plane of the vehicle Category L4: motorcycle fitted with a sidecar on the right side of the two-wheeled motorcycle Category L5: motorcycle with three wheels, one of which is located on the longitudinal center plane, and the other two wheels symmetrically arranged with respect to the longitudinal center plane 3.2 electric motorcycle motorcycle driven by electricity, including electric motorcycles with two wheels and electric motorcycles with three wheels 3.3 electric moped moped driven by electricity, including electric mopeds with two wheels and those with three wheels 3.4 hybrid electric motorcycle and moped vehicle that is able to obtain power from at least the following two types of on-board energy storage devices: - consumable fuel; - rechargeable energy storage device. 3.5 type test test conducted to verify whether a newly trial-produced model of a motorcycle or moped can meet the technical requirements of this standard, after the design of that particular model is completed 3.6 background noise noise (including wind noise) from the surrounding environment in the absence of noise from the test vehicle 3.7 noise reduction system complete set of components used to control noise radiated outward from the engine and the intake and exhaust systems of a motorcycle or moped 3.8 noise reduction system component individual independent components that constitute the noise reduction system, including but not limited to: exhaust manifold, exhaust pipe, expansion chamber, muffler, etc. If the intake system of the power unit must be equipped with an air filter and an intake silencer, then the air filter and the intake silencer are considered a component of the noise reduction system. 3.9 noise reduction system types Systems that are identical in the following aspects may be considered the same type: - the components are from the same manufacturer; - the material and internal structure of the components are the same; - the working principle is the same; - the installation method is the same. 3.10 test mass (mtest) kerb mass of the vehicle plus 75 kg Note: For the purposes of this standard, the test mass of electric three-wheeled motorcycles and electric three-wheeled mopeds includes the mass of the power storage battery. 3.11 total power of vehicle (Pn) total power of a motorcycle fitted with a spark-ignition engine or a compression-ignition engine refers to the maximum net power measured in accordance with GB/T 20076, in kW; the total power of a pure electric motorcycle refers to the sum of the continuous power ratings of all drive motors measured in accordance with QC/T 792, in kW; the total power of a hybrid drive system consisting of a spark-ignition or compression-ignition engine and an electric motor shall be tested according to the method specified in GB/T 20076, in kW. 3.12 drive motors continuous power maximum power at which the drive motor can operate continuously for 30 min 3.13 power to mass ratio index (PMR) ratio coefficient of the total power of the motorcycle to its test mass, used to calculate the target acceleration, reference acceleration, etc. It shall be calculated according to the following formula, and the calculated value shall be retained to one decimal place. PMR = (Pn/mtest) ×1000 (1) where Pn - total power of motorcycle, kW; mtest - test mass, kg. 3.14 reference point defined as the foremost point of the vehicle in this standard 3.15 target acceleration (aurban) acceleration of a vehicle under normal road driving conditions when the accelerator is partially opened, obtained from survey statistics 3.16 reference acceleration (awot,ref) acceleration of a vehicle when traveling on a test road with the accelerator fully opened, obtained from survey statistics 3.17 gear weighting factor (k) dimensionless numerical factor used in the acceleration noise test and constant-speed noise test to fit the measurement results of two selected gears 3.18 partial power factor (kp) dimensionless numerical factor used to fit the measurement results of the acceleration noise test and the constant-speed noise test 3.19 pre-acceleration control of the vehicle acceleration before AA' so as to obtain a stable acceleration within the measurement zone from AA' to BB' 3.20 locked gear gear ratio when the transmission gear position of the vehicle is kept unchanged during the noise test 3.21 multi-mode exhaust system exhaust system that can change the airflow direction and/or the noise reduction structure in the exhaust system by manual or electronic control, thereby providing multiple noise reduction effects 3.22 useful life durability mileage or period of the vehicle under normal operating conditions specified in this standard, whichever comes first 4 Type test 4.1 General 4.1.1 Manufacturers and importers shall select representative vehicles for type test. The test items are listed in Table 1. 4.1.2 The noise test information, noise control technology information and related technical information for information disclosure of vehicles that are required to be disclosed according to the applicable requirements (including the type test vehicle parameters in Annex A and the type test report format in Annex B) shall meet the requirements of HJ 1350. 4.1.3 Test bodies shall keep the test data and test reports for a long term (6 years for paper reports and electronic reports, and 2 years for video data). After the type test is completed, the test vehicle shall be sealed and stored at the test body. The sealing period is 1 year from the date the vehicle model information is disclosed. The test body shall maintain proper records of the sealing. Except for necessary maintenance, no adjustments shall be made to the test vehicle. For an imported test vehicle that cannot be kept sealed in China for one year due to the temporary import regulations of customs, it shall remain sealed until re‑export, and the sealing status shall be truthfully recorded. The period from the start of the type test to the end of sealing shall not be less than one year. 4.2 Road driving noise 4.2.1 Acceleration noise 4.2.1.1 Test conditions The road drive‑by noise of vehicles of categories L1, L2, L3, L4 and L5 shall be measured according to C.3.1.4 for acceleration noise. 4.2.1.2 Limit requirements For each test gear, at least three noise sound pressure level measurements shall be made on both the left and right sides of the motorcycle. The acceleration noise measurement results shall be processed according to C.3.5. The results shall not exceed the limits specified in Table 2.

Contents Foreword II 1 Scope of application 2 Normative references 3 Terms and definitions 4 Type test 5 Type test extension 6 Conformity of production 7 Test for in-use vehicles 8 Implementation of standard Annex A (Normative) Type test vehicle parameters Annex B (Informative) Type test report Annex C (Normative) Measurement method for road driving noise Annex D (Normative) Measurement method for stationary noise Annex E (Normative) Requirements for silencing systems fitted with fibrous sound‑absorbing materials Annex F (Normative) Production conformity assurance requirements