1 Scope
This standard specifies the terms and definitions, classification, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage, etc. of brake linings for automobiles.
This standard is applicable to brake linings for automobiles (hereinafter referred to as linings).
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest editions apply.
GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (GB/T 2828.1-2003, ISO 2859-1:1999, IDT)
GB/T 22309 Road Vehicles - Brake Linings - Shear Test Procedure for Disc Brake Pad and Drum Brake Shoe Assemblies (GB/T 22309-2008, ISO 6312:2001, IDT)
GB/T 22310 Road Vehicles - Brake Linings - Effects of Heat on Dimensions and Form of Disc Brake Pads - Test Procedure (GB/T 22310-2008, ISO 6313:1980, IDT)
GB/T 22311 Road Vehicles - Brake Linings - Compressive Strain Test Method (GB/T 22311-2008, ISO 6310:2001, IDT)
JB/T 7498 Coated Abrasives - Abrasive Paper
JC/T 1065 Constant Speed Friction Test Machine
3 Terms and Definitions
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Technical Requirements
6 Test Method
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
1 Scope
This standard specifies the terms and definitions, classification, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage, etc. of brake linings for automobiles.
This standard is applicable to brake linings for automobiles (hereinafter referred to as linings).
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest editions apply.
GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (GB/T 2828.1-2003, ISO 2859-1:1999, IDT)
GB/T 22309 Road Vehicles - Brake Linings - Shear Test Procedure for Disc Brake Pad and Drum Brake Shoe Assemblies (GB/T 22309-2008, ISO 6312:2001, IDT)
GB/T 22310 Road Vehicles - Brake Linings - Effects of Heat on Dimensions and Form of Disc Brake Pads - Test Procedure (GB/T 22310-2008, ISO 6313:1980, IDT)
GB/T 22311 Road Vehicles - Brake Linings - Compressive Strain Test Method (GB/T 22311-2008, ISO 6310:2001, IDT)
JB/T 7498 Coated Abrasives - Abrasive Paper
JC/T 1065 Constant Speed Friction Test Machine
3 Terms and Definitions
Contents of GB 5763-2008
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Technical Requirements
6 Test Method
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
