1 Scope
This part of GB 7000 specifies requirements for recessed luminaires for use with electric light source on supply voltages not exceeding 1 000 V. This part does not cover air-handing luminaires. This part does not apply to air-handling or liquid-cooled luminaires.
1.1 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB 5013 (all parts) Rubber insulated cables of rated voltages up to and including 450/750 V [IEC 60245 (all parts), IDT]
GB 5023(all parts) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V [IEC 60227 (all parts), IDT]
2 General Test Requirements
Foreword I
IEC Foreword III
1 Scope
2 General Test Requirements
3 Definitions
4 Classification of Luminaires
5 Marking
6 Construction
7 Creepage Distances and Clearances
8 Provision for Earthing
9 Terminals
10 External and Internal Wiring
11 Protection against Electric Shock
12 Endurance Tests and Thermal Tests
13 Resistance to Dust and Moisture
14 Insulation Resistance and Electric Strength
15 Resistance to Heat, Fire and Tracking
Appendix A (Informative) Measurement of Ambient Temperature in an Installation
1 Scope
This part of GB 7000 specifies requirements for recessed luminaires for use with electric light source on supply voltages not exceeding 1 000 V. This part does not cover air-handing luminaires. This part does not apply to air-handling or liquid-cooled luminaires.
1.1 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB 5013 (all parts) Rubber insulated cables of rated voltages up to and including 450/750 V [IEC 60245 (all parts), IDT]
GB 5023(all parts) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V [IEC 60227 (all parts), IDT]
2 General Test Requirements
Contents of GB 7000.202-2008
Foreword I
IEC Foreword III
1 Scope
2 General Test Requirements
3 Definitions
4 Classification of Luminaires
5 Marking
6 Construction
7 Creepage Distances and Clearances
8 Provision for Earthing
9 Terminals
10 External and Internal Wiring
11 Protection against Electric Shock
12 Endurance Tests and Thermal Tests
13 Resistance to Dust and Moisture
14 Insulation Resistance and Electric Strength
15 Resistance to Heat, Fire and Tracking
Appendix A (Informative) Measurement of Ambient Temperature in an Installation
