This standard specifies the technical requirements and inspection rules as well as the requirements for marking, packing, transportation and storage of the passenger lifts and freight lifts.
This standard is applicable to such electrically-driven traction type passenger lifts and freight lifts with rated speed no larger than 6.0m/s as well as those electrically-driven positive type passenger lifts and freight lifts with rated speed no larger than 0.63m/s. And the electrically-driven traction type passenger lifts and freight lifts with rated speed greater than 6.0m/s may refer to this standard, and the inapplicable part shall be determined by the manufacturer and the user through negotiation.
This standard is not applicable to the hydraulic lifts, dumbwaiter lifts and home lifts.
Foreword III
1 Scope
2 Normative References
3 Technical Requirements
3.1 Basic Requirements
3.2 Regular Service Conditions
3.3 Performance of Complete Machine
3.4 Requirements for Appearance Quality
3.5 Lift Machine
3.6 Speed Limiter
3.7 Safety Tongs
3.8 Buffer
3.9 Lift Ascending Car Overspeed Protection Means
3.10 Lift Car, Car Door and Door Operater
3.11 Landing Door and Door Lock
3.12 Suspension Gear
3.13 Counterweight and Balancing Weight
3.14 Guide Rail
3.15 Control Cabinet and Other Electrical Apparatuses
3.16 Energy Consumption
3.17 Additional Requirements of Barrier-free Design
3.18 Basic Requirements of Seismic Design
3.19 Operation Examination Before Putting into Service
4 Reliability
4.1 Reliability of Complete Machine
4.2 Reliability of Control Cabinet
4.3 Loading Conditions of Reliability Test
5 Inspection Rules
5.1 Delivery Inspection
5.2 Inspection Before Putting into Service
5.3 Type Test
6 Marking, Packing, Transportation, Storage and Technical Archives
6.1 Marking
6.2 Packing and Transportation
6.3 Storage
6.4 Technical Archives
Appendix A (Informative) Calculation and Measurement of Energy Consumption 1)
A.1 Prediction and Calculation of Energy Consumption
A.2 Measurement of Energy Consumption
Appendix B (Normative) Technical Archives Kept by Manufacturers after Selling Products
B.1 Essential Information
B.2 Technical Parameters of Suspension Gear
B.3 Guide Rail
B.4 Components
B.5 Electrical Drawings
This standard specifies the technical requirements and inspection rules as well as the requirements for marking, packing, transportation and storage of the passenger lifts and freight lifts.
This standard is applicable to such electrically-driven traction type passenger lifts and freight lifts with rated speed no larger than 6.0m/s as well as those electrically-driven positive type passenger lifts and freight lifts with rated speed no larger than 0.63m/s. And the electrically-driven traction type passenger lifts and freight lifts with rated speed greater than 6.0m/s may refer to this standard, and the inapplicable part shall be determined by the manufacturer and the user through negotiation.
This standard is not applicable to the hydraulic lifts, dumbwaiter lifts and home lifts.
Contents of GB/T 10058-2009
Foreword III
1 Scope
2 Normative References
3 Technical Requirements
3.1 Basic Requirements
3.2 Regular Service Conditions
3.3 Performance of Complete Machine
3.4 Requirements for Appearance Quality
3.5 Lift Machine
3.6 Speed Limiter
3.7 Safety Tongs
3.8 Buffer
3.9 Lift Ascending Car Overspeed Protection Means
3.10 Lift Car, Car Door and Door Operater
3.11 Landing Door and Door Lock
3.12 Suspension Gear
3.13 Counterweight and Balancing Weight
3.14 Guide Rail
3.15 Control Cabinet and Other Electrical Apparatuses
3.16 Energy Consumption
3.17 Additional Requirements of Barrier-free Design
3.18 Basic Requirements of Seismic Design
3.19 Operation Examination Before Putting into Service
4 Reliability
4.1 Reliability of Complete Machine
4.2 Reliability of Control Cabinet
4.3 Loading Conditions of Reliability Test
5 Inspection Rules
5.1 Delivery Inspection
5.2 Inspection Before Putting into Service
5.3 Type Test
6 Marking, Packing, Transportation, Storage and Technical Archives
6.1 Marking
6.2 Packing and Transportation
6.3 Storage
6.4 Technical Archives
Appendix A (Informative) Calculation and Measurement of Energy Consumption 1)
A.1 Prediction and Calculation of Energy Consumption
A.2 Measurement of Energy Consumption
Appendix B (Normative) Technical Archives Kept by Manufacturers after Selling Products
B.1 Essential Information
B.2 Technical Parameters of Suspension Gear
B.3 Guide Rail
B.4 Components
B.5 Electrical Drawings
