This standard specifies terms and definitions, requirements, test methods and marking for solid tyres for pneumatic tyres rims.
This standard is applicable to solid tyres for pneumatic tyres rims applied on counter balanced fork lift trucks, lifters, tractors, loaders, platform lorries and fixed platform trucks.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding the corrections), or revisions of, any of these publications do not apply. However, parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents apply. For any undated references, the latest edition of the document referred to applies.
GB/T 528 "Rubber, Vulcanized or Thermoplastic - Determination of Tensile Stress - Strain Properties" (GB/T 528-1998, eqv ISO 37: 1994)
GB/T 531 "Rubber - Determination of Indentation Hardness by Means of Pocket Hardness Meters" (GB/T 531-1999, idt ISO 7619: 1986)
GB/T 2941 "Rubber - General Procedures for Preparing and Conditioning Test Pieces for Physical Test Methods" (GB/T 2941-2006, ISO 23529: 2004, IDT)
GB/T 6326 "Tyre Terms and Definitions" (GB/T 6326 - 2005, ISO 4223-1: 2002, Definitions of Some Terms Used in Tyre Industry - Part 1: Pneumatic Tyres, NEQ)
GB/T 8170 "Rules for Rounding off of Numerical Values"
GB/T 10823 "Series of Solid Tyres for Pneumatic Tyres Rims"
HG/T 2177 "Appearance Quality of Tyres"
3 Terms and Definitions
Foreword I 1 Scope 2 Normative References 3 Terms and Definitions 4 Requirements 5 Test Methods 6 Marking Appendix A (Normative) Method for Measuring Overall Dimensions of Tyres Appendix B (Normative) Method for Determining Static Load Performance of the Tyre Appendix C (Normative) Test Methods for Physical Property of the Tyre Appendix D (Normative) Endurance Test Methods for Solid Tyres for Pneumatic Tyres Rims
1 Scope
This standard specifies terms and definitions, requirements, test methods and marking for solid tyres for pneumatic tyres rims.
This standard is applicable to solid tyres for pneumatic tyres rims applied on counter balanced fork lift trucks, lifters, tractors, loaders, platform lorries and fixed platform trucks.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding the corrections), or revisions of, any of these publications do not apply. However, parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents apply. For any undated references, the latest edition of the document referred to applies.
GB/T 528 "Rubber, Vulcanized or Thermoplastic - Determination of Tensile Stress - Strain Properties" (GB/T 528-1998, eqv ISO 37: 1994)
GB/T 531 "Rubber - Determination of Indentation Hardness by Means of Pocket Hardness Meters" (GB/T 531-1999, idt ISO 7619: 1986)
GB/T 1689 "Rubber Vulcanized - Determination of Abrasion Resistance (Akron Machine)"
GB/T 2941 "Rubber - General Procedures for Preparing and Conditioning Test Pieces for Physical Test Methods" (GB/T 2941-2006, ISO 23529: 2004, IDT)
GB/T 6326 "Tyre Terms and Definitions" (GB/T 6326 - 2005, ISO 4223-1: 2002, Definitions of Some Terms Used in Tyre Industry - Part 1: Pneumatic Tyres, NEQ)
GB/T 8170 "Rules for Rounding off of Numerical Values"
GB/T 10823 "Series of Solid Tyres for Pneumatic Tyres Rims"
HG/T 2177 "Appearance Quality of Tyres"
3 Terms and Definitions
Contents of GB/T 10824-2008
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Test Methods
6 Marking
Appendix A (Normative) Method for Measuring Overall Dimensions of Tyres
Appendix B (Normative) Method for Determining Static Load Performance of the Tyre
Appendix C (Normative) Test Methods for Physical Property of the Tyre
Appendix D (Normative) Endurance Test Methods for Solid Tyres for Pneumatic Tyres Rims
