This standard specifies the specimen, test apparatuses, test conditions, test procedures and result calculation for determination of interlaminar shear strength.
It is applicable to the determination of interlaminar shear strength of fabric reinforced plastics.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below. For undated references, the latest edition of the document referred to applies.
GB 1446-2005 Fiber-reinforced plastics composites - The generals for determination of properties
3 Principle
Apply load evenly on specimen with a specific shape, and the load direction is consistent with the interlaminar direction of the specimen, so that it is subjected to shear failure in the specified shear plane to determine the
Foreword i 1 Scope 2 Normative references 3 Principle 4 Specimen 5 Apparatus 6 Test conditions 7 Test procedure 8 Calculation 9 Test results 10 Test report
GB 1446-2005 Fibre-reinforced plastic composites - Determination of interlaminar shear strength
1 Scope
This standard specifies the specimen, test apparatuses, test conditions, test procedures and result calculation for determination of interlaminar shear strength.
It is applicable to the determination of interlaminar shear strength of fabric reinforced plastics.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below. For undated references, the latest edition of the document referred to applies.
GB 1446-2005 Fiber-reinforced plastics composites - The generals for determination of properties
3 Principle
Apply load evenly on specimen with a specific shape, and the load direction is consistent with the interlaminar direction of the specimen, so that it is subjected to shear failure in the specified shear plane to determine the
Contents of GB/T 1450.1-2005
Foreword i
1 Scope
2 Normative references
3 Principle
4 Specimen
5 Apparatus
6 Test conditions
7 Test procedure
8 Calculation
9 Test results
10 Test report
