1 Subject content and applicable scope
This standard specifies the test apparatus, sample preparation and test procedures for the determination of the softening point of hot-melt adhesives by ball and ring method.
This standard is applicable to the determination of softening point of solid hot-melt adhesives.
2 Principle
The steel ball with a certain mass is placed on the metal ring filled with the sample. Under the specified temperature rise condition, the steel ball enters the sample and falls from a certain height. When the steel ball contacts the bottom metal baffle, the temperature at this time is regarded as the softening point.
3 Apparatus and heat transfer medium
3.1 Softening point measuring device
Softening point measuring device (see Figure 1) consists of the following components:
1 Subject content and applicable scope
2 Principle
3 Apparatus and heat transfer medium
4 Sample preparation
5 Test procedures
6 Expression of results
7 Test report
Additional explanation:
1 Subject content and applicable scope
This standard specifies the test apparatus, sample preparation and test procedures for the determination of the softening point of hot-melt adhesives by ball and ring method.
This standard is applicable to the determination of softening point of solid hot-melt adhesives.
2 Principle
The steel ball with a certain mass is placed on the metal ring filled with the sample. Under the specified temperature rise condition, the steel ball enters the sample and falls from a certain height. When the steel ball contacts the bottom metal baffle, the temperature at this time is regarded as the softening point.
3 Apparatus and heat transfer medium
3.1 Softening point measuring device
Softening point measuring device (see Figure 1) consists of the following components:
Contents of GB/T 15332-1994
1 Subject content and applicable scope
2 Principle
3 Apparatus and heat transfer medium
4 Sample preparation
5 Test procedures
6 Expression of results
7 Test report
Additional explanation:
