1 Scope
This standard defines technical principles and specifications which shall be followed in the design of machinery products to ensure the safety of machinery.
This standard is applicable to design of machinery and other technical products having similar hazards.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. At time of publication, the editions indicated were valid. All the standards will be revised, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of the following standards are applicable.
GB/T 15706.1-1995 Safety of Machinery-Basic Concept, General Principles for Design Part 1: Basic Terminology, Methodology
3 Risk reduction by-design
Risk reduction by design consists in following actions, used separately or combined:
——avoiding or reducing as many of the hazards as possible by suitable choice of design features (see 3.1 to 3.9), and
——limiting persons exposure to hazards by reducing the need for operator intervention in danger zones (see 3.10 to 3.12).
3.1 Voiding sharp edges and corners, protruding parts, etc.
In so far as their purpose allows, accessible parts of the machinery shall have no sharp edges, no sharp angles, no rough surfaces, no protruding parts likely to cause injury, and no openings which may "trap" parts of the body or clothing. In particular, sheet metal edges shall be deburred, flanged or trimmed, open ends of tubes which may cause a "trap" shall be capped, etc.
Foreword
ISO Foreword
1 Scope
2 Normative References
3 Risk reduction by-design
4 Safeguarding
5 Information for Use
6 Additional Precautions
1 Scope
This standard defines technical principles and specifications which shall be followed in the design of machinery products to ensure the safety of machinery.
This standard is applicable to design of machinery and other technical products having similar hazards.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. At time of publication, the editions indicated were valid. All the standards will be revised, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of the following standards are applicable.
GB/T 15706.1-1995 Safety of Machinery-Basic Concept, General Principles for Design Part 1: Basic Terminology, Methodology
3 Risk reduction by-design
Risk reduction by design consists in following actions, used separately or combined:
——avoiding or reducing as many of the hazards as possible by suitable choice of design features (see 3.1 to 3.9), and
——limiting persons exposure to hazards by reducing the need for operator intervention in danger zones (see 3.10 to 3.12).
3.1 Voiding sharp edges and corners, protruding parts, etc.
In so far as their purpose allows, accessible parts of the machinery shall have no sharp edges, no sharp angles, no rough surfaces, no protruding parts likely to cause injury, and no openings which may "trap" parts of the body or clothing. In particular, sheet metal edges shall be deburred, flanged or trimmed, open ends of tubes which may cause a "trap" shall be capped, etc.
Contents of GB/T 15706.2-1995
Foreword
ISO Foreword
1 Scope
2 Normative References
3 Risk reduction by-design
4 Safeguarding
5 Information for Use
6 Additional Precautions
