1 Scope
This Part of GB/T 16649 specifies the physical characteristics of integrated circuit(s) cards with contacts. It applies to identification cards of the ID-1 card type which may include embossing and/or a magnetic stripe (as specified in ISO/IEC 7811).
This Part of GB/T 16649 applies to cards which have a physical interface with electrical contacts. It does not, however, define the nature, number and position of the integrated circuits in the cards.
Note: Other types of IC cards, formats or interfaces may be developed in the future which will call for additions to be made to this Part or will result in the need for other National Standards to be prepared.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Part. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 14916-2006 Identification cards — Physical characteristics (ISO/IEC/FDIS 7810:2003, IDT)
GB/T 17554.1-2006 Identification cards — Test methods — Part 1: General characteristics tests (ISO/IEC 10373-1:1998, MOD)
GB/T 17554.3-2006 Identification cards — Test methods — Part 3: Integrated circuit(s) cards with contacts and related interface devices (ISO/IEC 10373-3:2001, MOD)
ISO/IEC 7811 Identification cards — Recording technique
GB/T 17552-1998 Identification cards — Financial transaction cards (idt ISO/IEC 7813:1995)
3 Terms and Definitions
For the purposes of this Part of GB/T 16649, the following terms and definitions apply.
3.1
Integrated circuit(s)
Electronic component(s) designed to perform processing and/or memory functions.
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Physical Characteristics
1 Scope
This Part of GB/T 16649 specifies the physical characteristics of integrated circuit(s) cards with contacts. It applies to identification cards of the ID-1 card type which may include embossing and/or a magnetic stripe (as specified in ISO/IEC 7811).
This Part of GB/T 16649 applies to cards which have a physical interface with electrical contacts. It does not, however, define the nature, number and position of the integrated circuits in the cards.
Note: Other types of IC cards, formats or interfaces may be developed in the future which will call for additions to be made to this Part or will result in the need for other National Standards to be prepared.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Part. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 14916-2006 Identification cards — Physical characteristics (ISO/IEC/FDIS 7810:2003, IDT)
GB/T 17554.1-2006 Identification cards — Test methods — Part 1: General characteristics tests (ISO/IEC 10373-1:1998, MOD)
GB/T 17554.3-2006 Identification cards — Test methods — Part 3: Integrated circuit(s) cards with contacts and related interface devices (ISO/IEC 10373-3:2001, MOD)
ISO/IEC 7811 Identification cards — Recording technique
GB/T 17552-1998 Identification cards — Financial transaction cards (idt ISO/IEC 7813:1995)
3 Terms and Definitions
For the purposes of this Part of GB/T 16649, the following terms and definitions apply.
3.1
Integrated circuit(s)
Electronic component(s) designed to perform processing and/or memory functions.
Contents of GB/T 16649.1-2006
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Physical Characteristics
