Peracetic acid solution
Warning——This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.
1 Scope
This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of peracetic acid solution.
This document is applicable to peracetic acid solution formed by the reaction of hydrogen peroxide and acetic acid.
Note: This product is mainly used as raw material for disinfectant, bleach and organic synthetic.
Molecular formula of peracetic acid: C2H4O3
Structural formula of peracetic acid:
Relative molecular mass of peracetic acid: 76.05 (as per the international relative atomic mass in 2018)
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 190 Packing symbol of dangerous goods
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 601 Chemical reagent - Preparations of reference titration solutions
GB/T 602 Chemical reagent - Preparations of standard solutions for impurity
GB/T 603 Chemical reagent - Preparations of reagent solutions for use in test methods
GB/T 610 Chemical reagent - General method for the determination of arsenic
GB/T 6678 General principles for sampling chemical products
GB/T 6680 General rules for sampling liquid chemical products
GB/T 6682 Water for analytical laboratory use - Specification and test methods
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 9728 Chemical reagent - General method for the determination of sulphate
GB/T 9735 Chemical reagent - General method for the determination of heavy metals
GB 12268 List of dangerous goods
GB 15258 General rules for preparation of precautionary label for chemicals
GB 15603 Rule for storage of chemical dangers
GB 27833 Safety code for packaging of hazardous chemicals of organic peroxides
GB 28644.3 Classification and list of organic peroxides
GB 30000.16 Rules for classification and labelling of chemicals - Part 16: Organic peroxides
3 Terms and definitions
No terms and definitions are listed in this document.
4 Properties
The peracetic acid solution is colorless or light yellow transparent liquid with pungent smell and acetic acid smell.
5 Classification
This product is classified into two types according to its application. Type I is used as raw material for bleach and organic synthetic, and Type II is used as raw material for disinfectant.
6 Requirements
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Properties
5 Classification
6 Requirements
7 Test methods
8 Inspection rules
9 Marking, packaging, transportation and storage
Annex A (Informative) Safety
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Properties
5 Classification
6 Requirements
7 Test methods
8 Inspection rules
9 Marking, packaging, transportation and storage
Annex A (Informative) Safety
Peracetic acid solution
Warning——This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.
1 Scope
This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of peracetic acid solution.
This document is applicable to peracetic acid solution formed by the reaction of hydrogen peroxide and acetic acid.
Note: This product is mainly used as raw material for disinfectant, bleach and organic synthetic.
Molecular formula of peracetic acid: C2H4O3
Structural formula of peracetic acid:
Relative molecular mass of peracetic acid: 76.05 (as per the international relative atomic mass in 2018)
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 190 Packing symbol of dangerous goods
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 601 Chemical reagent - Preparations of reference titration solutions
GB/T 602 Chemical reagent - Preparations of standard solutions for impurity
GB/T 603 Chemical reagent - Preparations of reagent solutions for use in test methods
GB/T 610 Chemical reagent - General method for the determination of arsenic
GB/T 6678 General principles for sampling chemical products
GB/T 6680 General rules for sampling liquid chemical products
GB/T 6682 Water for analytical laboratory use - Specification and test methods
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 9728 Chemical reagent - General method for the determination of sulphate
GB/T 9735 Chemical reagent - General method for the determination of heavy metals
GB 12268 List of dangerous goods
GB 15258 General rules for preparation of precautionary label for chemicals
GB 15603 Rule for storage of chemical dangers
GB 27833 Safety code for packaging of hazardous chemicals of organic peroxides
GB 28644.3 Classification and list of organic peroxides
GB 30000.16 Rules for classification and labelling of chemicals - Part 16: Organic peroxides
3 Terms and definitions
No terms and definitions are listed in this document.
4 Properties
The peracetic acid solution is colorless or light yellow transparent liquid with pungent smell and acetic acid smell.
5 Classification
This product is classified into two types according to its application. Type I is used as raw material for bleach and organic synthetic, and Type II is used as raw material for disinfectant.
6 Requirements
Contents of GB/T 19104-2021
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Properties
5 Classification
6 Requirements
7 Test methods
8 Inspection rules
9 Marking, packaging, transportation and storage
Annex A (Informative) Safety
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Properties
5 Classification
6 Requirements
7 Test methods
8 Inspection rules
9 Marking, packaging, transportation and storage
Annex A (Informative) Safety
