1 Scope
This part specifies requirements for cable trunking and cable ducting systems intended for the accommodation, and where necessary for the segregation, of conductors, cables or cords and/or other electrical equipment in electrical installations.
This part does not apply to conduit, cable tray or cable ladder (cable bridge) or current-carrying parts within the system.
Note: There are many different designs of systems (see annex A) for which a Part 2 is under consideration.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of GB/T 19215. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this part. However parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 3956-1997 Conductors of Insulated Cables (idt IEC 60228:1978)
GB 4208-1993 Degrees of Protection Provided by Enclosure (IP Code) (eqv IEC 60529:1989)
GB/T 5169.11-1997 Fire Hazard Testing for Electric and Electronic Products - Test Methods - Glow-wire End-product Test and Guidance (idt IEC 60695-2-1/1:1994)
GB/T 5169.14-2001 Fire Hazard Testing for Electric and Electronic Products - Test Methods - 1 kW Nominal Pre-mixed Test Flame and Guidance (idt IEC 60695-2-4/1:1991)
GB 16895.1-1997 Electrical Installations of Buildings - Part 1: Scope, Object and Fundamental Principles (idt IEC 60364-1:1992)
GB 16895.3-1997 Electrical Installations of Buildings - Part 5: Selection and Erection of Electrical Equipment - Chapter 54: Earthing Arrangements and Protective Conductors (idt IEC 60364-5-54:1980)
GB/T 16895.18-2002 Electrical Installations of Buildings - Part 5: Selection and Erection of Electrical Equipment - Chapter 51: Common Rules (idt IEC 60364-5-51:1979)
GB/T 17194-1997 Conduits for Electrical Purposes - Outside Diameters of Conduits for Electrical Installations and Threads of Conduits and Fittings (eqv IEC 60423:1993)
3 Definitions
For the purpose of this part, the following terms and definitions apply.
3.1
cable trunking or ducting system
3.1.1
cable trunking system
a system of closed enclosures comprising a base with a removable cover intended for the complete surrounding of insulated conductors, cables, cords and/or for the accommodation of other electrical equipment
3.1.2
cable ducting system
a system of closed enclosures of non-circular section, for insulated conductors, cables and cords in electrical installations, allowing them to be drawn in and replaced
3.2
system component
parts used within the system which include
a) lengths of trunking or ducting;
b) trunking or ducting fittings;
c) fixing devices;
Foreword i
1 Scope
2 Normative References
3 Definitions
4 General Requirements
5 General Conditions for Tests
6 Classification
7 Marking
8 Dimensions
9 Construction
10 Mechanical Properties
11 Resistance to Flame Propagation
12 Electrical Characteristics
13 External Influences (Under Consideration)
Annex A (Informative) Types of Trunking and Ducting Systems for Electrical Installation
Annex B (Informative) Supplemental Explanation on the Marking of Trunking and Ducting Systems for Electrical Installation
Annex C (Informative) Technical Differences Between This Part and IEC 61084-1:1991 and Their Reasons
1 Scope
This part specifies requirements for cable trunking and cable ducting systems intended for the accommodation, and where necessary for the segregation, of conductors, cables or cords and/or other electrical equipment in electrical installations.
This part does not apply to conduit, cable tray or cable ladder (cable bridge) or current-carrying parts within the system.
Note: There are many different designs of systems (see annex A) for which a Part 2 is under consideration.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of GB/T 19215. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this part. However parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 3956-1997 Conductors of Insulated Cables (idt IEC 60228:1978)
GB 4208-1993 Degrees of Protection Provided by Enclosure (IP Code) (eqv IEC 60529:1989)
GB/T 5169.11-1997 Fire Hazard Testing for Electric and Electronic Products - Test Methods - Glow-wire End-product Test and Guidance (idt IEC 60695-2-1/1:1994)
GB/T 5169.14-2001 Fire Hazard Testing for Electric and Electronic Products - Test Methods - 1 kW Nominal Pre-mixed Test Flame and Guidance (idt IEC 60695-2-4/1:1991)
GB 16895.1-1997 Electrical Installations of Buildings - Part 1: Scope, Object and Fundamental Principles (idt IEC 60364-1:1992)
GB 16895.3-1997 Electrical Installations of Buildings - Part 5: Selection and Erection of Electrical Equipment - Chapter 54: Earthing Arrangements and Protective Conductors (idt IEC 60364-5-54:1980)
GB/T 16895.18-2002 Electrical Installations of Buildings - Part 5: Selection and Erection of Electrical Equipment - Chapter 51: Common Rules (idt IEC 60364-5-51:1979)
GB/T 17194-1997 Conduits for Electrical Purposes - Outside Diameters of Conduits for Electrical Installations and Threads of Conduits and Fittings (eqv IEC 60423:1993)
3 Definitions
For the purpose of this part, the following terms and definitions apply.
3.1
cable trunking or ducting system
3.1.1
cable trunking system
a system of closed enclosures comprising a base with a removable cover intended for the complete surrounding of insulated conductors, cables, cords and/or for the accommodation of other electrical equipment
3.1.2
cable ducting system
a system of closed enclosures of non-circular section, for insulated conductors, cables and cords in electrical installations, allowing them to be drawn in and replaced
3.2
system component
parts used within the system which include
a) lengths of trunking or ducting;
b) trunking or ducting fittings;
c) fixing devices;
Contents of GB/T 19215.1-2003
Foreword i
1 Scope
2 Normative References
3 Definitions
4 General Requirements
5 General Conditions for Tests
6 Classification
7 Marking
8 Dimensions
9 Construction
10 Mechanical Properties
11 Resistance to Flame Propagation
12 Electrical Characteristics
13 External Influences (Under Consideration)
Annex A (Informative) Types of Trunking and Ducting Systems for Electrical Installation
Annex B (Informative) Supplemental Explanation on the Marking of Trunking and Ducting Systems for Electrical Installation
Annex C (Informative) Technical Differences Between This Part and IEC 61084-1:1991 and Their Reasons
