This standard specifies the test procedures of energy consumption rate and range of electric motorcycles and electric mopeds.
This standard is applicable to electric motorcycles and electric mopeds (see GB/T 24158 for the definition, hereinafter referred to as "electric motorcycles" unless otherwise indicated) with energy storage battery as the only power source.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 5378 General rules of running test for motorcycles and mopeds
GB 14622 Limits and measurement methods for the emissions of pollutants from motorcycles on the running mode(China stage III)
GB/T 17883-1999 Alternating current static watt-hour meters for active energy (classes 0.2S and 0.5S) (eqv IEC 60678:1992)
GB 18176 Limits and measurement methods for emissions of pollutants from mopeds on the running mode(China stage III)
GB/T 18385 Electric vehicles — Power performance — Test method
GB/T 19596 Terminology of electric vehicles (GB/T 19596-2004, ISO 8713:2002, NEQ)
GB/T 24156-2009 Electric motorcycles and electric mopeds — Power performance — Test methods
GB 24155 Electric motorcycles and electric mopeds — Safety specifications
GB/T 24158 Electric motorcycles and electric mopeds — General specifications
3 Terms and Definitions
For the purpose of this document, terms and definitions given in GB/T 19596, GB/T 5359.1, GB 24158 and the following apply.
1 Scope
This standard specifies the test procedures of energy consumption rate and range of electric motorcycles and electric mopeds.
This standard is applicable to electric motorcycles and electric mopeds (see GB/T 24158 for the definition, hereinafter referred to as "electric motorcycles" unless otherwise indicated) with energy storage battery as the only power source.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 5378 General rules of running test for motorcycles and mopeds
GB 14622 Limits and measurement methods for the emissions of pollutants from motorcycles on the running mode(China stage III)
GB/T 17883-1999 Alternating current static watt-hour meters for active energy (classes 0.2S and 0.5S) (eqv IEC 60678:1992)
GB 18176 Limits and measurement methods for emissions of pollutants from mopeds on the running mode(China stage III)
GB/T 18385 Electric vehicles — Power performance — Test method
GB/T 19596 Terminology of electric vehicles (GB/T 19596-2004, ISO 8713:2002, NEQ)
GB/T 24156-2009 Electric motorcycles and electric mopeds — Power performance — Test methods
GB 24155 Electric motorcycles and electric mopeds — Safety specifications
GB/T 24158 Electric motorcycles and electric mopeds — General specifications
3 Terms and Definitions
For the purpose of this document, terms and definitions given in GB/T 19596, GB/T 5359.1, GB 24158 and the following apply.
3.1
