GB/T 2516-2003 English Version, GB/T 2516-2003 General purpose metric screw threads—Limit devications (English Version)

Chinese Classification Professional Classification ICS Classification Latest News Value-added Services

Position: Chinese Standard in English/GB/T 2516-2003

GB/T 2516-2003 General purpose metric screw threads—Limit devications (English Version)
Standard No.:	GB/T 2516-2003	Status:	superseded remind me the status change Email:
Target Language:	English	File Format:	PDF
Word Count:	6000 words	Translation Price(USD):	180.0 remind me the price change Email:
Implemented on:	2004-1-1	Delivery:	via email in 1~3 business day

→

Standard No.:	GB/T 2516-2003
English Name:	General purpose metric screw threads—Limit devications
Chinese Name:	普通螺纹极限偏差
Chinese Classification:	J04 Basic standards and general methods
Professional Classification:	GB National Standard
ICS Classification:	21.040.10 21.040.10 Metric screw threads 21.040.10
Source Content Issued by:	AQSIQ
Issued on:	2003-05-22
Implemented on:	2004-1-1
Status:	superseded
Superseded by:	GB/T 2516-2023 General purpose metric screw threads—Limit deviations
Superseded on:	2024-6-1
Superseding:	GB/T 2516-1981 Common screw thread deviation table
Target Language:	English
File Format:	PDF
Word Count:	6000 words
Translation Price(USD):	180.0
Delivery:	via email in 1~3 business day

GB/T 2516-2003 is referred in:

* GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements
* GB 3836.2-2010 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures“d”
* GB/T 197-2003 General Purpose Metric Screw Threads-Tolerances
* GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements
* GB 3836.2-2010 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures“d”
* GB/T 197-2003 General Purpose Metric Screw Threads-Tolerances
* GB/T 5267.3-2008 Fasteners - Hot dip galvanized coatings
* GB/T 5267.3-2008 Fasteners - Hot dip galvanized coatings
* GB/T 9160.1-2006 Rolling bearings - Accessories - Part 1: Tapered sleeves
* GB/T 9160.2-2006 Rolling bearings-Accessories-Part 2:Locknuts and locking devices
* GB/T 9160.2-2006 Rolling bearings-Accessories-Part 2:Locknuts and locking devices
* GB/T 9160.2-2006 Rolling bearings-Accessories-Part 2:Locknuts and locking devices
* GB/T 197-2003 General Purpose Metric Screw Threads-Tolerances
* GB/T 3215-2007 Centrifugal pumps for petroleum petrochemical and natural gas industries
* GB/T 79-2007 Hexagon socket set screws with dog point
* GB/T 78-2007 Hexagon socket set screws with cone point
*GB/T 3836.1-2021 Explosive atmospheres—Part 1：Equipment—General requirements
*GB/T 3836.2-2021 Explosive atmospheres—Part 2：Equipment protection by flameproof enclosures “d”
*GB/T 5267.2-2021 Fasteners—Non-electrolytically applied zinc flake coatings
*GB/T 70.6-2020 Hexagon socket head cap screws－Fine pitch thread

Standard

GB/T 2516-2003 General purpose metric screw threads—Limit devications (English Version)
Standard No.	GB/T 2516-2003
Status	superseded
Language	English
File Format	PDF
Word Count	6000 words
Price(USD)	180.0
Implemented on	2004-1-1
Delivery	via email in 1~3 business day

Detail of GB/T 2516-2003

Standard No.

English Name

Chinese Name

Chinese Classification

Professional Classification

ICS Classification

Issued by

Issued on

Implemented on

Status

Superseded by

Superseded on

Abolished on

Superseding

Language

File Format

Word Count

Price(USD)

Keywords

Introduction of GB/T 2516-2003

本标准依据GB/T 197-2003的基本偏差和公差，规定了普通螺纹中径和顶径的极限偏差。普通螺纹的基本牙型和直径与螺距系列分别符合GB/T 192-2003和GB/T 193-2003的规定，适用于一般用途的机械紧固螺纹联接，其螺纹本身不具有密封功能。

Contents of GB/T 2516-2003

Tel: +86-10-8572 5655 \| Fax: +86-10-8581 9515 \| Email: coc@codeofchina.com \| QQ: 672269886
Copyright: Beijing COC Tech Co., Ltd. 2008-2040



Keywords:
GB/T 2516-2003, GB 2516-2003, GBT 2516-2003, GB/T2516-2003, GB/T 2516, GB/T2516, GB2516-2003, GB 2516, GB2516, GBT2516-2003, GBT 2516, GBT2516