GB/T 26875.5-2026 Remote-monitoring system of urban fire protection—Part 5:Functional requirements for receiving software English, Anglais, Englisch, Inglés, えいご
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.
ICS
CCS
National Standard of the People's Republic of China
GB/T 26875.5-2026
Remote-monitoring system of urban fire protection - Part 5: Functional requirements for receiving software
城市消防远程监控系统 第5部分：受理软件功能要求
Issue date: 2026-04-30 Implementation date: 2026-10-01
Issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
the Standardization Administration of the People's Republic of China
Contents
Foreword
Introduction
1 Scope
2 Normative References
3 Terms and Definitions
4 Functional Requirements
5 Conformity Evaluation
Bibliography
Remote monitoring system of urban fire protection — Part 5: Functional requirements for receiving software
1 Scope
This document specifies the functional requirements and conformity evaluation for the receiving software used at manual receiving agent seats on the application support platform in a remote monitoring system of urban fire protection.
This document applies to the design, development and testing of the receiving software (hereinafter referred to as the “software”) used at manual receiving agent seats on the application support platform in a remote monitoring system of urban fire protection (hereinafter referred to as the “system”).
2 Normative References
The following documents are essential for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 25000.51-2016 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Part 51: Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
GB/T 26875.1 Remote monitoring system of urban fire protection — Part 1: General technical requirements
3 Terms and Definitions
The terms and definitions given in GB/T 26875.1 apply to this document.
4 Functional Requirements
4.1 After the software is started and run or after a login operation, it shall automatically enter the receiving working state.
4.2 The software shall have operation confirmation prompts for functions such as parameter configuration, shift handover, on duty/off duty state switching, and exiting.
4.3 The software interface shall be displayed in Chinese. It shall have display interfaces for text information, geographic information and video information, and shall display, but not be limited to, the following information:
a) Unreceived information;
b) Date and time information;
c) Software version information;
d) Receiving agent seat and receiving agent information;
e) Off duty or on duty status information of receiving agents;
f) Communication connection status information.
Among the above information, the content in a) shall not be covered.
4.4 When two or more agent seats are online simultaneously receiving information, the software shall have functions for the assignment management of unreceived information to agent seats, for taking over information, and for transferring and pushing information.
4.5 During information processing, there shall be an indication of the receiving process. For improper operations, there shall be an alarm prompt.
4.6 The display interfaces for text information, geographic information and video information shall have associated operation functions. When processing newly received information on the text information display interface, the geographic information display interface and the video information display interface shall automatically switch to the corresponding geographic location and video interface. When performing a positioning operation on the geographic information display interface, the relevant location information shall be able to be extracted into the text information display interface.
4.7 The software shall be able to record and query the off duty and on duty times of receiving agents, the shift handover times of receiving agents, and duty notes, and shall have a log viewing function. The operation log shall include, but not be limited to, the start and exit times of the software, the times and content of parameter configuration changes, the times and content of software error prompts, and the times and status information of communication connection status changes.
4.8 The software shall have a time synchronisation function. The time deviation after time synchronisation shall comply with the provisions of GB/T 26875.1.
4.9 The software shall be able to receive, display, process and query the fire facility operational status information of networked units.
4.10 The software shall be able to display and query the fire safety management information of networked units, and shall be able to monitor and process the dynamic management information of the fire safety management information of networked units.
Standard
GB/T 26875.5-2026 Remote-monitoring system of urban fire protection—Part 5:Functional requirements for receiving software (English Version)
Standard No.
GB/T 26875.5-2026
Status
to be valid
Language
English
File Format
PDF
Word Count
9000 words
Price(USD)
270.0
Implemented on
2027-5-1
Delivery
via email in 1~3 business day
Detail of GB/T 26875.5-2026
Standard No.
GB/T 26875.5-2026
English Name
Remote-monitoring system of urban fire protection—Part 5:Functional requirements for receiving software
GB/T 26875.5-2026 Remote-monitoring system of urban fire protection—Part 5:Functional requirements for receiving software English, Anglais, Englisch, Inglés, えいご
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.
ICS
CCS
National Standard of the People's Republic of China
GB/T 26875.5-2026
Remote-monitoring system of urban fire protection - Part 5: Functional requirements for receiving software
城市消防远程监控系统 第5部分：受理软件功能要求
Issue date: 2026-04-30 Implementation date: 2026-10-01
Issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
the Standardization Administration of the People's Republic of China
Contents
Foreword
Introduction
1 Scope
2 Normative References
3 Terms and Definitions
4 Functional Requirements
5 Conformity Evaluation
Bibliography
Remote monitoring system of urban fire protection — Part 5: Functional requirements for receiving software
1 Scope
This document specifies the functional requirements and conformity evaluation for the receiving software used at manual receiving agent seats on the application support platform in a remote monitoring system of urban fire protection.
This document applies to the design, development and testing of the receiving software (hereinafter referred to as the “software”) used at manual receiving agent seats on the application support platform in a remote monitoring system of urban fire protection (hereinafter referred to as the “system”).
2 Normative References
The following documents are essential for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 25000.51-2016 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Part 51: Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
GB/T 26875.1 Remote monitoring system of urban fire protection — Part 1: General technical requirements
3 Terms and Definitions
The terms and definitions given in GB/T 26875.1 apply to this document.
4 Functional Requirements
4.1 After the software is started and run or after a login operation, it shall automatically enter the receiving working state.
4.2 The software shall have operation confirmation prompts for functions such as parameter configuration, shift handover, on duty/off duty state switching, and exiting.
4.3 The software interface shall be displayed in Chinese. It shall have display interfaces for text information, geographic information and video information, and shall display, but not be limited to, the following information:
a) Unreceived information;
b) Date and time information;
c) Software version information;
d) Receiving agent seat and receiving agent information;
e) Off duty or on duty status information of receiving agents;
f) Communication connection status information.
Among the above information, the content in a) shall not be covered.
4.4 When two or more agent seats are online simultaneously receiving information, the software shall have functions for the assignment management of unreceived information to agent seats, for taking over information, and for transferring and pushing information.
4.5 During information processing, there shall be an indication of the receiving process. For improper operations, there shall be an alarm prompt.
4.6 The display interfaces for text information, geographic information and video information shall have associated operation functions. When processing newly received information on the text information display interface, the geographic information display interface and the video information display interface shall automatically switch to the corresponding geographic location and video interface. When performing a positioning operation on the geographic information display interface, the relevant location information shall be able to be extracted into the text information display interface.
4.7 The software shall be able to record and query the off duty and on duty times of receiving agents, the shift handover times of receiving agents, and duty notes, and shall have a log viewing function. The operation log shall include, but not be limited to, the start and exit times of the software, the times and content of parameter configuration changes, the times and content of software error prompts, and the times and status information of communication connection status changes.
4.8 The software shall have a time synchronisation function. The time deviation after time synchronisation shall comply with the provisions of GB/T 26875.1.
4.9 The software shall be able to receive, display, process and query the fire facility operational status information of networked units.
4.10 The software shall be able to display and query the fire safety management information of networked units, and shall be able to monitor and process the dynamic management information of the fire safety management information of networked units.
