GB/T 26952-2025 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels
1 Scope
This document specifies acceptance levels for indications from imperfections in ferromagnetic steel welds detected by magnetic particle testing.
The acceptance levels are primarily intended for use during manufacture examination.
Note: They can also be used for in-service inspection.
The acceptance levels in this document are based on detection capabilities that can be expected when using techniques specified in ISO 17638 and parameters recommended in Annex A. The acceptance levels can be related to welding standards, application standards, specifications or codes. Such a relationship is shown in ISO 17635 for ISO 5817.
Acceptance levels for grouped indications are not covered by this document.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/TS 18173 Non-destructive testing - General terms and definitions
Note: GB/T 20737-2006, Non-destructive testing - General terms and definitions (ISO/TS 18173:2005, IDT)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/TS 18173 and the following apply.
3.1
linear indication
l
indication having a length greater than three times its width
3.2
non-linear indication
d
Contents
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 Testing parameters
5 Acceptance levels
Annex A (informative) Recommended testing parameters
Bibliography
Standard
GB/T 26952-2025 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (English Version)
Standard No.
GB/T 26952-2025
Status
to be valid
Language
English
File Format
PDF
Word Count
7000 words
Price(USD)
150.0
Implemented on
2026-2-1
Delivery
via email in 1 business day
Detail of GB/T 26952-2025
Standard No.
GB/T 26952-2025
English Name
Non-destructive testing of welds - Magnetic particle testing - Acceptance levels
GB/T 26952-2025 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels
1 Scope
This document specifies acceptance levels for indications from imperfections in ferromagnetic steel welds detected by magnetic particle testing.
The acceptance levels are primarily intended for use during manufacture examination.
Note: They can also be used for in-service inspection.
The acceptance levels in this document are based on detection capabilities that can be expected when using techniques specified in ISO 17638 and parameters recommended in Annex A. The acceptance levels can be related to welding standards, application standards, specifications or codes. Such a relationship is shown in ISO 17635 for ISO 5817.
Acceptance levels for grouped indications are not covered by this document.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/TS 18173 Non-destructive testing - General terms and definitions
Note: GB/T 20737-2006, Non-destructive testing - General terms and definitions (ISO/TS 18173:2005, IDT)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/TS 18173 and the following apply.
3.1
linear indication
l
indication having a length greater than three times its width
3.2
non-linear indication
d
Contents of GB/T 26952-2025
Contents
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 Testing parameters
5 Acceptance levels
Annex A (informative) Recommended testing parameters
Bibliography
