1 Scope
This standard specifies the designation, classification and code number, order contents, dimensions, shape, weight and tolerances, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of low alloy steel and alloy steel hot-rolled steel plates and strips used for automobile frame.
It is applicable to hot-rolled steel plates and strips (hereinafter referred to as steel plates and steel strips) 1.6mm~16.0mm in thickness used for manufacturing automobile frame (longitudinal frame and transverse frame).
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 222 Permissible Tolerances for Chemical Composition of Steel Products
GB/T 223.3 Methods for Chemical Analysis of Iron, Steel and Alloy - the Diantipyryl Methane Phosphomolybdate Gravimetric Method for the Determination of Phosphorus Content
GB/T 223.5 Steel and Iron - Determination of Acid-soluble Silicon and Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method
GB/T 223.6 Methods for Chemical Analysis of Iron, Steel and Alloy - The neutralization Titrimetric Method for the Determination of Boron Content
GB/T 223.11 Iron, Steel and Alloy - Determination of Chromium Content - Visual Titration or Potentiometric Titration Method
GB/T 223.12 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium carbonate Separation-diphenyl carbazide Photometric Method for the Determination of Chromium Content
GB/T 223.13 Methods for Chemical Analysis of Iron, Steel and Alloy - The Ammonium Ferrous Sulfate Titration Method for the Determination of Vanadium Content
GB/T 223.14 Methods for Chemical Analysis of Iron, Steel and Alloy - The N-benzoy-N-phenylhydroxylamine Extraction Photometric Method for the Determination of Vanadium Content
GB/T 223.16 Methods for Chemical Analysis of Iron, Steel and Alloy - The Chromotropic Acid Photometric Method for the Determination of Titanium Content
GB/T 223.17 Methods for Chemical Analysis of Iron, Steel and Alloy - The Diantipyryl Methane Photometric Method for the Determination of Titanium Content
GB/T 223.18 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Thiosulfate Separation Iodimetric Method for the Determination of Copper Content
GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy - The Neocuproine-chloroform Extraction Photometric Method for the Determination of Copper Content
GB/T 223.23 Iron, Steel and Alloy - Determination of Nickel Content - The Dimethylglyoxime Spectrophotometric Method
GB/T 223.26 Iron, steel and Alloy - Determination of Molybdenum content - The Thiocyanate Spectrophotometric Method
GB/T 223.40 Iron, Steel and Alloy - Determination of Niobium Content - The Sulphochlorophenol S Spectrophotometric Method
GB/T 223.49 Methods for Chemical Analysis of Iron, Steel and Alloy - Extraction Separation-chlorophosphonazo mA Spectrophotometric Method for the Determination of the Total Rare Earth Content
GB/T 223.53 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrophotometric Method for the Determination of Copper Content
GB/T 223.54 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrophotometric Method for the Determination of Nickel Content
GB/T 223.58 Methods for Chemical Analysis of Iron, Steel and Alloy - The Extraction-absorption Catalytic Polarographic Method for the Determination of Manganese Content
GB/T 223.59 Iron, Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method
Foreword i
1 Scope
2 Normative References
3 Designation, Classification and Code Number
4 Order Contents
5 Dimension, Shape, Weight and Tolerances
6 Technical Requirements
7 Special Requirement
8 Test methods
9 Inspection Rules
10 Packing, Marking and Quality Certificate
Annex A (Informative) Comparison of Designations in This Standard and Similar Designations in Foreign Standards
1 Scope
This standard specifies the designation, classification and code number, order contents, dimensions, shape, weight and tolerances, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of low alloy steel and alloy steel hot-rolled steel plates and strips used for automobile frame.
It is applicable to hot-rolled steel plates and strips (hereinafter referred to as steel plates and steel strips) 1.6mm~16.0mm in thickness used for manufacturing automobile frame (longitudinal frame and transverse frame).
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 222 Permissible Tolerances for Chemical Composition of Steel Products
GB/T 223.3 Methods for Chemical Analysis of Iron, Steel and Alloy - the Diantipyryl Methane Phosphomolybdate Gravimetric Method for the Determination of Phosphorus Content
GB/T 223.5 Steel and Iron - Determination of Acid-soluble Silicon and Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method
GB/T 223.6 Methods for Chemical Analysis of Iron, Steel and Alloy - The neutralization Titrimetric Method for the Determination of Boron Content
GB/T 223.11 Iron, Steel and Alloy - Determination of Chromium Content - Visual Titration or Potentiometric Titration Method
GB/T 223.12 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium carbonate Separation-diphenyl carbazide Photometric Method for the Determination of Chromium Content
GB/T 223.13 Methods for Chemical Analysis of Iron, Steel and Alloy - The Ammonium Ferrous Sulfate Titration Method for the Determination of Vanadium Content
GB/T 223.14 Methods for Chemical Analysis of Iron, Steel and Alloy - The N-benzoy-N-phenylhydroxylamine Extraction Photometric Method for the Determination of Vanadium Content
GB/T 223.16 Methods for Chemical Analysis of Iron, Steel and Alloy - The Chromotropic Acid Photometric Method for the Determination of Titanium Content
GB/T 223.17 Methods for Chemical Analysis of Iron, Steel and Alloy - The Diantipyryl Methane Photometric Method for the Determination of Titanium Content
GB/T 223.18 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Thiosulfate Separation Iodimetric Method for the Determination of Copper Content
GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy - The Neocuproine-chloroform Extraction Photometric Method for the Determination of Copper Content
GB/T 223.23 Iron, Steel and Alloy - Determination of Nickel Content - The Dimethylglyoxime Spectrophotometric Method
GB/T 223.26 Iron, steel and Alloy - Determination of Molybdenum content - The Thiocyanate Spectrophotometric Method
GB/T 223.40 Iron, Steel and Alloy - Determination of Niobium Content - The Sulphochlorophenol S Spectrophotometric Method
GB/T 223.49 Methods for Chemical Analysis of Iron, Steel and Alloy - Extraction Separation-chlorophosphonazo mA Spectrophotometric Method for the Determination of the Total Rare Earth Content
GB/T 223.53 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrophotometric Method for the Determination of Copper Content
GB/T 223.54 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrophotometric Method for the Determination of Nickel Content
GB/T 223.58 Methods for Chemical Analysis of Iron, Steel and Alloy - The Extraction-absorption Catalytic Polarographic Method for the Determination of Manganese Content
GB/T 223.59 Iron, Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method
Contents of GB/T 3273-2015
Foreword i
1 Scope
2 Normative References
3 Designation, Classification and Code Number
4 Order Contents
5 Dimension, Shape, Weight and Tolerances
6 Technical Requirements
7 Special Requirement
8 Test methods
9 Inspection Rules
10 Packing, Marking and Quality Certificate
Annex A (Informative) Comparison of Designations in This Standard and Similar Designations in Foreign Standards
