GB/T 3295-2025 Test method for specular gloss of ceramic ware English, Anglais, Englisch, Inglés, えいご
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing thorugh draft translation, self-check, revision and varification) will be delivered upon being ordered.
ICS 81.060.20 CCS Y 24
People's Republic of China National Standard
GB/T 3295-2025 Replaces GB/T 3295-1996
Test Method for Specular Gloss of Ceramic Ware
Issued: 2025-08-29
Implemented: 2026-03-01
Issued by:
State Administration for Market Regulation
Standardization Administration of China
Contents
Foreword
Introduction
1 Scope
2 Normative References
3 Terms and Definitions
4 Principle
5 Apparatus
6 Specimen Preparation
7 Test Procedure
8 Calculation and Result Expression
9 Test Report
Specular Gloss Test Method for Ceramic Ware
1 Scope
This document specifies the test method for measuring the specular gloss of ceramic products.
It applies to the evaluation of corrosion resistance, abrasion resistance, and other external factors affecting surface properties of ceramic ware.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute essential requirements:
GB/T 5000 Terminology for Daily Ceramics
JJG 696 Verification Regulation for Glossmeters and Gloss Plates
3 Terms and Definitions
Terms defined in GB/T 5000 and JJG 696, as well as the following, apply:
3.1 Specular Gloss (GS)
Relative measurement value of mirror reflection intensity.
3.2 Gloss Standard Plate
Ceramic plate or polished black glass plate with uniform, wear-resistant surface.
4 Principle
The gloss value is determined by comparing the reflected light intensity of the sample surface at a specified incident angle with that of a standard gloss plate under identical conditions.
Standard
GB/T 3295-2025 Test method for specular gloss of ceramic ware (English Version)
GB/T 3295-2025 Test method for specular gloss of ceramic ware English, Anglais, Englisch, Inglés, えいご
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing thorugh draft translation, self-check, revision and varification) will be delivered upon being ordered.
ICS 81.060.20 CCS Y 24
People's Republic of China National Standard
GB/T 3295-2025 Replaces GB/T 3295-1996
Test Method for Specular Gloss of Ceramic Ware
Issued: 2025-08-29
Implemented: 2026-03-01
Issued by:
State Administration for Market Regulation
Standardization Administration of China
Contents
Foreword
Introduction
1 Scope
2 Normative References
3 Terms and Definitions
4 Principle
5 Apparatus
6 Specimen Preparation
7 Test Procedure
8 Calculation and Result Expression
9 Test Report
Specular Gloss Test Method for Ceramic Ware
1 Scope
This document specifies the test method for measuring the specular gloss of ceramic products.
It applies to the evaluation of corrosion resistance, abrasion resistance, and other external factors affecting surface properties of ceramic ware.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute essential requirements:
GB/T 5000 Terminology for Daily Ceramics
JJG 696 Verification Regulation for Glossmeters and Gloss Plates
3 Terms and Definitions
Terms defined in GB/T 5000 and JJG 696, as well as the following, apply:
3.1 Specular Gloss (GS)
Relative measurement value of mirror reflection intensity.
3.2 Gloss Standard Plate
Ceramic plate or polished black glass plate with uniform, wear-resistant surface.
4 Principle
The gloss value is determined by comparing the reflected light intensity of the sample surface at a specified incident angle with that of a standard gloss plate under identical conditions.
