Organic light emitting diode (OLED) light sources for general lighting - Safety – Part 2-1: Particular requirements - Semi-integrated OLED modules
1 Scope
This documents specifies safety requirements for semi-integrated organic light emitting diode modules.
The semi-integrated organic light emitting diode modules operates with an external controlgear connected to the mains voltage, and which, in addition, have a control means inside ("semi-integrated") for operation under constant voltage, constant current or constant power.
This document applies to semi-integrated organic light emitting diode modules operating at a rated voltage up to 120 V ripple free DC or 50 V AC RMS at 50 Hz or 60 Hz.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 7000.1-2023 Luminaires - Part 1: General requirements and tests (IEC 60598-1:2020, MOD)
Note: There is no technical difference between the referenced content of GB/T 7000.1-2023 and the referenced content of IEC 60598-1:2017.
GB/T 19510.1-2023 Controlgear for electric light sources - Part 1: General and safety requirements (IEC 61347-1:2017, MOD)
Note: There is no technical difference between the referenced content of GB/T 19510.1-2023 and the referenced content of IEC 61347-1:2017.
GB/T 39075.1-2023 Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 1:General requirements and tests (IEC 62868-1:2020, IDT)
IEC 62504 General lighting - Light emitting diode (LED) products and related equipment -Terms and definitions
Note: GB/T 24826-2016, General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions (IEC 62504:2014, IDT)
IEC 60838-2-2 Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED modules
Note: GB/T 19651.3-2008, Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules (IEC 60838-2-2:2006, IDT)
IEC TS 62972 General lighting - Organic light emitting diode (OLED) products and related equipment - Terms and definitions
Note: GB/T 10123-2022, Corrosion of metals and alloys - Vocabulary (ISO 8044:2020, IDT)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 62504, GB/T 39075.1-2023 and IEC TS 62972 and the following apply.
3.1
rated maximum temperature
tc
highest permissible temperature which may occur on the outer surface of the OLED module (at the indicated position, if marked) under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range
4 General
The requirements of GB/T 39075.1-2023, Clause 4 apply.
5 Marking
5.1 Contents and location
Marking of the module shall be done according to GB/T 39075.1-2023, 5.1 . Additionally, the rated maximum temperature tc shall be marked on the packaging or product datasheet or leaflet but is optional on the product.
5.2 Durability and legibility of marking
The requirements of GB/T 39075.1-2023, 5.2 apply.
6 Construction
The requirements of GB/T 39075.1-2023, Clause 6 apply.
7 Mechanical hazard
The requirements of GB/T 39075.1-2023, Clause 7 apply.
8 Fault conditions
The requirements of GB/T 19510.1-2023, Clause 14, apply. Additionally, the requirements of GB/T 39075.1-2023, Clause 8 apply.
9 Insulation resistance and electric strength after humidity treatment
9.1 General requirements
Insulation resistance and electric strength shall be adequate between live parts of the OLED module and accessible parts of the OLED module.
9.2 Insulation resistance
Insulation shall be adequate between live parts and outer metal parts, including fixing screws and metal foil in contact with outer insulating parts.
The OLED module shall be conditioned for 48 h in a cabinet containing air with a relative
humidity between 91 % and 95 %. The temperature of the air shall be maintained within 1 °C of any convenient value between 20 °C and 30 °C.
Insulation resistance shall be measured in the humidity cabinet with a DC voltage of 100 V, 1 min after application of the voltage.
Compliance:
The insulation resistance shall be not less than 1 MΩ between live parts and the outer metal parts.
9.3 Electric strength
Immediately after the insulation resistance test, the OLED module shall withstand an electric strength test for 1 min applied between the parts as specified in 9.2.
The test voltage of substantially sine-wave form shall have a value of 500 V RMS and frequency of 50 Hz or 60 Hz. Initially, not more than half the specified voltage shall be applied, the voltage shall then be raised rapidly to the full value. Measurements shall be carried out in a humidity cabinet.
Compliance:
No flashover or breakdown shall occur during the test.
10 Creepage distances and clearances
The requirements of GB/T 19510.1-2023, Clause 16 apply.
11 Resistance to heat and fire
The requirements of GB/T 19510.1-2023, Clause 1 8 apply.
12 Photobiological safety
OLED products are not expected to reach a level of UV, infrared or blue light hazard that
requires marking or measurement.
13 Terminals
For screw terminals, the requirements of GB/T 7000.1-2023, Section 14, shall be used, if
applicable.
For screwless terminals, the requirements of GB/T 7000.1-2023, Section 1 5, shall be used, if applicable.
For connectors, the requirements of IEC 60838-2-2 shall be used, if applicable.
14 Protection against accidental contact with live parts
The requirements of GB/T 19510.1-2023, Clause 10, apply.
15 Screws, current-carrying parts and connections
The requirements of GB/T 19510.1-2023, Clause 17, apply.
16 Resistance to corrosion
The requirements of GB/T 19510.1-2023, Clause 19, apply.
17 Information for luminaire design
Information for luminaire design is given in GB/T 39075.1-2023, Annex B.
Organic light emitting diode (OLED) light sources for general lighting - Safety – Part 2-1: Particular requirements - Semi-integrated OLED modules
1 Scope
This documents specifies safety requirements for semi-integrated organic light emitting diode modules.
The semi-integrated organic light emitting diode modules operates with an external controlgear connected to the mains voltage, and which, in addition, have a control means inside ("semi-integrated") for operation under constant voltage, constant current or constant power.
This document applies to semi-integrated organic light emitting diode modules operating at a rated voltage up to 120 V ripple free DC or 50 V AC RMS at 50 Hz or 60 Hz.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 7000.1-2023 Luminaires - Part 1: General requirements and tests (IEC 60598-1:2020, MOD)
Note: There is no technical difference between the referenced content of GB/T 7000.1-2023 and the referenced content of IEC 60598-1:2017.
GB/T 19510.1-2023 Controlgear for electric light sources - Part 1: General and safety requirements (IEC 61347-1:2017, MOD)
Note: There is no technical difference between the referenced content of GB/T 19510.1-2023 and the referenced content of IEC 61347-1:2017.
GB/T 39075.1-2023 Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 1:General requirements and tests (IEC 62868-1:2020, IDT)
IEC 62504 General lighting - Light emitting diode (LED) products and related equipment -Terms and definitions
Note: GB/T 24826-2016, General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions (IEC 62504:2014, IDT)
IEC 60838-2-2 Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED modules
Note: GB/T 19651.3-2008, Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules (IEC 60838-2-2:2006, IDT)
IEC TS 62972 General lighting - Organic light emitting diode (OLED) products and related equipment - Terms and definitions
Note: GB/T 10123-2022, Corrosion of metals and alloys - Vocabulary (ISO 8044:2020, IDT)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 62504, GB/T 39075.1-2023 and IEC TS 62972 and the following apply.
3.1
rated maximum temperature
tc
highest permissible temperature which may occur on the outer surface of the OLED module (at the indicated position, if marked) under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range
4 General
The requirements of GB/T 39075.1-2023, Clause 4 apply.
5 Marking
5.1 Contents and location
Marking of the module shall be done according to GB/T 39075.1-2023, 5.1 . Additionally, the rated maximum temperature tc shall be marked on the packaging or product datasheet or leaflet but is optional on the product.
5.2 Durability and legibility of marking
The requirements of GB/T 39075.1-2023, 5.2 apply.
6 Construction
The requirements of GB/T 39075.1-2023, Clause 6 apply.
7 Mechanical hazard
The requirements of GB/T 39075.1-2023, Clause 7 apply.
8 Fault conditions
The requirements of GB/T 19510.1-2023, Clause 14, apply. Additionally, the requirements of GB/T 39075.1-2023, Clause 8 apply.
9 Insulation resistance and electric strength after humidity treatment
9.1 General requirements
Insulation resistance and electric strength shall be adequate between live parts of the OLED module and accessible parts of the OLED module.
9.2 Insulation resistance
Insulation shall be adequate between live parts and outer metal parts, including fixing screws and metal foil in contact with outer insulating parts.
The OLED module shall be conditioned for 48 h in a cabinet containing air with a relative
humidity between 91 % and 95 %. The temperature of the air shall be maintained within 1 °C of any convenient value between 20 °C and 30 °C.
Insulation resistance shall be measured in the humidity cabinet with a DC voltage of 100 V, 1 min after application of the voltage.
Compliance:
The insulation resistance shall be not less than 1 MΩ between live parts and the outer metal parts.
9.3 Electric strength
Immediately after the insulation resistance test, the OLED module shall withstand an electric strength test for 1 min applied between the parts as specified in 9.2.
The test voltage of substantially sine-wave form shall have a value of 500 V RMS and frequency of 50 Hz or 60 Hz. Initially, not more than half the specified voltage shall be applied, the voltage shall then be raised rapidly to the full value. Measurements shall be carried out in a humidity cabinet.
Compliance:
No flashover or breakdown shall occur during the test.
10 Creepage distances and clearances
The requirements of GB/T 19510.1-2023, Clause 16 apply.
11 Resistance to heat and fire
The requirements of GB/T 19510.1-2023, Clause 1 8 apply.
12 Photobiological safety
OLED products are not expected to reach a level of UV, infrared or blue light hazard that
requires marking or measurement.
13 Terminals
For screw terminals, the requirements of GB/T 7000.1-2023, Section 14, shall be used, if
applicable.
For screwless terminals, the requirements of GB/T 7000.1-2023, Section 1 5, shall be used, if applicable.
For connectors, the requirements of IEC 60838-2-2 shall be used, if applicable.
14 Protection against accidental contact with live parts
The requirements of GB/T 19510.1-2023, Clause 10, apply.
15 Screws, current-carrying parts and connections
The requirements of GB/T 19510.1-2023, Clause 17, apply.
16 Resistance to corrosion
The requirements of GB/T 19510.1-2023, Clause 19, apply.
17 Information for luminaire design
Information for luminaire design is given in GB/T 39075.1-2023, Annex B.
