Inspection, marking and packing for grey woven fabric of cotton, man-made fibres and blends
1 Scope
This document specifies the inspection, marking and packing for grey woven fabric of cotton, man-made fibres and blends
This document is applicable to the grey woven fabric made of grey yarns of cotton, man-made fibres and other fibers or blends. Such way may serve as a reference for other fabrics.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 4666 Textiles - Fabrics- Determination of width and length
GB/T 5296.4 Instructions for use of products of consumer interest - Part 4: Textiles and apparel
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 22865 Kraft
GB/T 36973 Textiles - Woven fabric descriptions
FZ/T 10025 Technical requirement specifications for grey fabric
3 Terms and definitions
No terms and definitions are listed in this document.
4 Inspection
4.1 General rules
4.1.1 The inspection content includes inherent quality, appearance quality, length, marking, and packing.
4.1.2 The supplier shall issue a product inspection certificate based on the inspection results of product quality.
4.1.3 The purchaser shall, within 15 days after receiving the product (unless otherwise agreed by both parties), accept the product according to the sales contract of the supplier and the purchaser or product standard, and notify the supplier of the acceptance result in time. If the supplier fails to reply within 7 days or the time agreed by both parties, the acceptance result of the purchaser shall prevail.
4.1.4 If the purchaser fails to inform the supplier of the acceptance results within 15 days after receiving the products or within the time agreed by both parties due to the condition limited, the goods shall be received according to the supplier's inspection results.
4.2 Sampling method
4.2.1 Products with the same raw materials, process, variety specifications, and production batch No. shall be regarded as one inspection batch, or batched according to the sales contract.
4.2.2 Samples for inherent quality, appearance quality, length, marking, and packaging inspection shall be randomly taken from the inspection batch.
4.2.3 If the supplier and the purchaser disagree with the inspection results, they shall re-sample the same quantity in this batch of products for inspection, and take the re-inspection results as the inspection results of this batch of products.
4.2.4 If there is another sampling plan agreed upon the supplier and the purchaser, the agreement shall prevail.
Contents
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Inspection
5 Marking
6 Packing
7 Others
Annex A (Normative) Stipulation of false cut through and combined piece
Annex B (Normative) Stipulation of bag made of odds and ends of cloth
Inspection, marking and packing for grey woven fabric of cotton, man-made fibres and blends
1 Scope
This document specifies the inspection, marking and packing for grey woven fabric of cotton, man-made fibres and blends
This document is applicable to the grey woven fabric made of grey yarns of cotton, man-made fibres and other fibers or blends. Such way may serve as a reference for other fabrics.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 4666 Textiles - Fabrics- Determination of width and length
GB/T 5296.4 Instructions for use of products of consumer interest - Part 4: Textiles and apparel
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 22865 Kraft
GB/T 36973 Textiles - Woven fabric descriptions
FZ/T 10025 Technical requirement specifications for grey fabric
3 Terms and definitions
No terms and definitions are listed in this document.
4 Inspection
4.1 General rules
4.1.1 The inspection content includes inherent quality, appearance quality, length, marking, and packing.
4.1.2 The supplier shall issue a product inspection certificate based on the inspection results of product quality.
4.1.3 The purchaser shall, within 15 days after receiving the product (unless otherwise agreed by both parties), accept the product according to the sales contract of the supplier and the purchaser or product standard, and notify the supplier of the acceptance result in time. If the supplier fails to reply within 7 days or the time agreed by both parties, the acceptance result of the purchaser shall prevail.
4.1.4 If the purchaser fails to inform the supplier of the acceptance results within 15 days after receiving the products or within the time agreed by both parties due to the condition limited, the goods shall be received according to the supplier's inspection results.
4.2 Sampling method
4.2.1 Products with the same raw materials, process, variety specifications, and production batch No. shall be regarded as one inspection batch, or batched according to the sales contract.
4.2.2 Samples for inherent quality, appearance quality, length, marking, and packaging inspection shall be randomly taken from the inspection batch.
4.2.3 If the supplier and the purchaser disagree with the inspection results, they shall re-sample the same quantity in this batch of products for inspection, and take the re-inspection results as the inspection results of this batch of products.
4.2.4 If there is another sampling plan agreed upon the supplier and the purchaser, the agreement shall prevail.
Contents of GB/T 43831-2024
Contents
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Inspection
5 Marking
6 Packing
7 Others
Annex A (Normative) Stipulation of false cut through and combined piece
Annex B (Normative) Stipulation of bag made of odds and ends of cloth
