Standard No.:	GB/T 45384-2025
English Name:	Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Pneumatic gas/air ratio pressure regulator
Chinese Name:	燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 气动式燃气与空气比例调节装置
Chinese Classification:	P45    Heat supply, air supply, air conditioning and refrigerating engineering in general
Professional Classification:	GB    National Standard
Source Content Issued by:	SAMR; SAC
Issued on:	2025-03-28
Implemented on:	2025-10-1
Status:	valid
Target Language:	English
File Format:	PDF
Word Count:	14500 words
Translation Price(USD):	435.0
Delivery:	via email in 1~5 business day

GB/T 45384-2025 Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Pneumatic gas/air ratio pressure regulator English, Anglais, Englisch, Inglés, えいご This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered. ICS 91.140 CCS P 45 National Standards of the People's Republic of China GB/T 45384-2025 Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Pneumatic gas/air ratio pressure regulator 燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 气动式燃气与空气比例调节装置 (English Translation) Issue date: 2025-03-28 Implementation date: 2025-10-01 Issued by the State Administration for Market Regulation the Standardization Administration of the People's Republic of China Contents Foreword 1 Scope 2 Normative references 3 Terms and definitions 4 Classification and grouping 5 Structure and materials 6 Requirements 7 Test method 8 Inspection rules 9 Signs, installation and operation instructions 10 Packaging, transportation and storage Annex A (Informative) Correspondence table of clauses supporting the basic requirements of GB 16914-2023 Annex B (Informative) Application diagram of proportional adjustment device Annex C (Normative) Functional test device Bibliography Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Pneumatic gas/air ratio pressure regulator 1 Scope This document specifies the classification and grouping, structure and materials, requirements, test methods, inspection rules, signs, installation and operation instructions, packaging, transportation and storage of pneumatic gas-air ratio regulating devices for burners and burning appliances using urban gas specified in GB/T 13611 (hereinafter referred to as "ratio regulating devices"). This document is applicable to proportional adjustment devices with nominal size not greater than DN 250 and maximum inlet pressure not greater than 500 kPa, which are used for gas water heaters, gas heating water heaters, gas stoves, gas burners/machines, gas heaters, gas steamers, gas boilers and other gas burning appliances or combustion equipment that change the gas pressure by signal pressure and can be tested separately. This document is not applicable to mechanically linked gas/air proportional regulating devices and electronic gas/air proportional control systems specified in GB/T 39488. 2 Normative references The following documents contain references which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 2423.10 Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal) GB 3836.4 Explosive atmospheres - Part 4: Equipment protection by intrinsic safety “i” GB/T 30597-2014 General requirements of safety and control devices for gas burners and gas-burning appliances 3 Terms and definitions For the purpose of this document, the terms and definitions given in GB/T 30597-2014 apply. 3.1 pneumatic gas/air ratio pressure regulator apparatus for regulating the output pressure of gas and maintaining a certain ratio to air by responding to signal pressure Note: See Annex B for application examples. 3.2 gas/air ratio linear ratio of the signal pressure applied to the proportioning device to the gas outlet pressure 3.3 signal pressure the air pressure, differential pressure and/or combustion chamber pressure applied to the proportioning device in order to provide a particular gas outlet pressure 3.3.1 positive signal pressure P3 positive pressure due to air flow Note: For example, positive pressure signal pressure generated by fan air flow (blowing force). 3.3.2 negative signal pressure P4 negative pressure due to air flow Note: For example, negative pressure signal pressure generated by fan airflow (suction force). 3.3.3 combustion chamber pressure Psc the combustion flue gas pressure output from the combustion chamber and applied to the proportioning device 3.4 signal chamber a part where the input of the signal pressure is connected to the proportional adjustment device 3.5 signal tube signal tube line for transmitting pressure from signal source to signal chamber 3.6 stabilization time settling time when the signal pressure changes stepwise, the time required for the outlet pressure to reach and remain within a given deviation range Note: See Figure 1 for the schematic diagram of stabilization time. 3.7 offset adjustment adjustment of zero point deviation of comparative ratio adjusting device Note: See Figure 2 for the schematic diagram of offset adjustment of non-industrial proportional adjustment device. 4 Classification and grouping 4.1 Categories The classification of proportional adjustment devices should comply with the provisions of 4.1 in GB/T 30597-2014, and should be divided into non-industrial uses and industrial uses according to the use occasions of the proportional adjustment devices. 4.2 Grouping The grouping of proportional adjustment devices shall comply with the provisions of 4.2 in GB/T 30597-2014. 5 Structure and materials 5.1 General requirements The general structure of the proportional adjustment device shall comply with the provisions of 5.1 in GB/T 30597-2014.