GB/T 6543-2025 Single and double corrugated boxes for transport packages
1 Scope
This document gives the classification, specifies the requirements, inspection rules, as well as marking, packaging, transportation, storage, and describes the test methods of single and double corrugated boxes for transport packages (hereinafter referred to as "corrugated boxes").
This document is applicable to the design, production and inspection of corrugated boxes with a mass of contents in them not exceeding 55kg.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 462 Paper, board and pulp - Determination of moisture content of analytical sample
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 4857.4 Packaging - Basic tests for transport packages - Part 4: Compression and stacking tests using a compression tester
GB/T 6544-2008 Corrugated fiberboard
GB/T 6545 Corrugated fibreboard - Determination of bursting strength
GB/T 6546 Corrugated fibreboard - Determination of edgewise crush resistance
GB/T 6547 Corrugated fiberboard - Determination of thickness
GB/T 6548 Determination of ply adhesive strength for corrugated fiberboard
GB/T 10739 Paper, board and pulps - Standard atmosphere for conditioning and testing
GB/T 17497.3-2012 Decorative products by flexographic printing - Part 3: Corrugated board
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
corrugated fiberboard
composite fiberboard made of one or more layers of corrugated paper bonded between several layers of paper or fiberboard
[Source: GB/T 6544-2008, 3.1.2, modified]
3.2
corrugated box
box mainly made from corrugated cardboard (3.1)
3.3
inside dimension of length plus width and depth
sum of the length, width and height of the inside dimensions of box
[Source: GB/T 16717-2013, 3.1]
3.4
hole of box corner
holes existing at the corners of the corrugated box (3.2) after it is formed
3.5
prime section
section with printed graphics and text that reflect the theme
3.6
subprime section
other sections of printed graphics and text except the prime section
4 Classification
4.1 Category of corrugated boxes
Corrugated boxes are classified into 2 categories and 20 types according to the maximum mass and inside dimension of length plus width and depth of the contents, circulation environmental conditions, and the different types of corrugated cardboard used, as shown in Table 1. The performance of the corrugated cardboard used for each type of corrugated box shall not be lower than the values specified in GB/T 6544-2008, Table 1. Category 1 boxes are mainly used in situations with relatively harsh circulation environments, while Category 2 boxes are mainly used in situations with better circulation environments.
Table 1 Category of corrugated box
Class of corrugated box Maximum mass of contents
kg Maximum inside dimension of length plus width and depth
mm Category 1 Category 2
Box type code Fiberboard code Box type code Fiberboard code
Single corrugated box 5 700 BS-1.1 S-1.1 BS-2.1 S-2.1
10 1 000 BS-1.2 S-1.2 BS-2.2 S-2.2
20 1400 BS-1.3 S-1.3 BS-2.3 S-2.3
30 1750 BS-1.4 S-1.4 BS-2.4 S-2.4
40 2000 BS-1.5 S-1.5 BS-2.5 S-2.5
Double corrugated box 15 1 000 BD-1.1 D-1.1 BD-2.1 D-2.1
20 1400 BD-1.2 D-1.2 BD-2.2 D-2.2
30 1750 BD-1.3 D-1.3 BD-2.3 D-2.3
40 2000 BD-1.4 D-1.4 BD-2.4 D-2.4
55 2500 BD-1.5 D-1.5 BD-2.5 D-2.5
Note: where the maximum mass and maximum inside dimension of length plus width and depth of contents are not at the same level, the larger one shall prevail.
4.2 Basic box type and code
Basic box type and code of corrugated boxes are shown in Annex A. Depending on the different contents, other types of corrugated boxes can also be used. Box accessories, such as baffle plates, liners and bases, may be used in corrugated boxes, and their types and codes are shown in Annex B.
Foreword II
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transportation and storage
Annex A (Informative) Base box types and codes
Annex B (Informative) Types and codes of accessories
Annex C (Informative) Interrelationship between unfolded dimension, outer dimension and inner dimension of Type 0201 box
Annex D (Informative) Calculation method for compressive strength of empty corrugated box
Bibliography
GB/T 6543-2025 Single and double corrugated boxes for transport packages
1 Scope
This document gives the classification, specifies the requirements, inspection rules, as well as marking, packaging, transportation, storage, and describes the test methods of single and double corrugated boxes for transport packages (hereinafter referred to as "corrugated boxes").
This document is applicable to the design, production and inspection of corrugated boxes with a mass of contents in them not exceeding 55kg.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 462 Paper, board and pulp - Determination of moisture content of analytical sample
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 4857.4 Packaging - Basic tests for transport packages - Part 4: Compression and stacking tests using a compression tester
GB/T 6544-2008 Corrugated fiberboard
GB/T 6545 Corrugated fibreboard - Determination of bursting strength
GB/T 6546 Corrugated fibreboard - Determination of edgewise crush resistance
GB/T 6547 Corrugated fiberboard - Determination of thickness
GB/T 6548 Determination of ply adhesive strength for corrugated fiberboard
GB/T 10739 Paper, board and pulps - Standard atmosphere for conditioning and testing
GB/T 17497.3-2012 Decorative products by flexographic printing - Part 3: Corrugated board
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
corrugated fiberboard
composite fiberboard made of one or more layers of corrugated paper bonded between several layers of paper or fiberboard
[Source: GB/T 6544-2008, 3.1.2, modified]
3.2
corrugated box
box mainly made from corrugated cardboard (3.1)
3.3
inside dimension of length plus width and depth
sum of the length, width and height of the inside dimensions of box
[Source: GB/T 16717-2013, 3.1]
3.4
hole of box corner
holes existing at the corners of the corrugated box (3.2) after it is formed
3.5
prime section
section with printed graphics and text that reflect the theme
3.6
subprime section
other sections of printed graphics and text except the prime section
4 Classification
4.1 Category of corrugated boxes
Corrugated boxes are classified into 2 categories and 20 types according to the maximum mass and inside dimension of length plus width and depth of the contents, circulation environmental conditions, and the different types of corrugated cardboard used, as shown in Table 1. The performance of the corrugated cardboard used for each type of corrugated box shall not be lower than the values specified in GB/T 6544-2008, Table 1. Category 1 boxes are mainly used in situations with relatively harsh circulation environments, while Category 2 boxes are mainly used in situations with better circulation environments.
Table 1 Category of corrugated box
Class of corrugated box Maximum mass of contents
kg Maximum inside dimension of length plus width and depth
mm Category 1 Category 2
Box type code Fiberboard code Box type code Fiberboard code
Single corrugated box 5 700 BS-1.1 S-1.1 BS-2.1 S-2.1
10 1 000 BS-1.2 S-1.2 BS-2.2 S-2.2
20 1400 BS-1.3 S-1.3 BS-2.3 S-2.3
30 1750 BS-1.4 S-1.4 BS-2.4 S-2.4
40 2000 BS-1.5 S-1.5 BS-2.5 S-2.5
Double corrugated box 15 1 000 BD-1.1 D-1.1 BD-2.1 D-2.1
20 1400 BD-1.2 D-1.2 BD-2.2 D-2.2
30 1750 BD-1.3 D-1.3 BD-2.3 D-2.3
40 2000 BD-1.4 D-1.4 BD-2.4 D-2.4
55 2500 BD-1.5 D-1.5 BD-2.5 D-2.5
Note: where the maximum mass and maximum inside dimension of length plus width and depth of contents are not at the same level, the larger one shall prevail.
4.2 Basic box type and code
Basic box type and code of corrugated boxes are shown in Annex A. Depending on the different contents, other types of corrugated boxes can also be used. Box accessories, such as baffle plates, liners and bases, may be used in corrugated boxes, and their types and codes are shown in Annex B.
Contents of GB/T 6543-2025
Foreword II
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transportation and storage
Annex A (Informative) Base box types and codes
Annex B (Informative) Types and codes of accessories
Annex C (Informative) Interrelationship between unfolded dimension, outer dimension and inner dimension of Type 0201 box
Annex D (Informative) Calculation method for compressive strength of empty corrugated box
Bibliography
