Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 6723-2008 Cold forming sectional steel - Open sectional steel for general structure - Dimensions, shape, weight and permissible tolerances and the following main changes have been made with respect to GB/T 6723-2008:
——The standard name is modified;
——The “order contents” is added;
——The product specification is added;
——The equilateral flanging angle steel is added;
——The technical requirements are added.
This standard was proposed by the China Iron and Steel Association.
This standard is under the jurisdiction of the National Technical Committee on Iron and Steel of Standardization Administration of China (SAC/TC 183).
The previous editions of this standard are as follows:
——GB/T 6723-1986, GB/T 6723-2002 and GB/T 6723-2008.
Cold forming open section steel for general structure
1 Scope
This standard specifies the order contents, classification, code, sectional dimension and permissible deviations, length and permissible deviation, profile, technical requirements, weight and marking example for cold forming open section steel for general structure.
This standard is applicable to cold forming open section steel for general structure (hereinafter referred to as section steel) which is produced from cold-rolled or hot-rolled steel strip on the consecutive roller cold forming units.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 6725 General requirements of cold forming steel sections
3 Order contents
Contracts or orders made based on this standard shall cover the following items:
a) Standard No.;
b) Product name;
c) Grade;
d) Delivery weight;
e) Dimension and profile;
f) Special requirements.
4 Classification and code
The section steel is classified into 9 classes coded respectively as follows:
a) Cold-formed equal angle steel JD;
b) Cold-formed unequal angle steel JB;
c) Cold-formed equilateral channel steel CD;
d) Cold-formed unequal channel steel CB;
e) Cold-formed interior crimping channel steel CN;
f) Cold-formed exterior crimping channel steel CW;
g) Cold-formed Z-shaped steel Z;
h) Cold-formed flanging Z-shaped steel ZJ;
i) Equilateral flanging angle steel JJ.
5 Sectional dimension and permissible deviation
5.1 The section shapes and marking symbols for section steel
The section shapes and marking symbols for section steel are shown in Figures 1~9. As agreed upon between the supplier and the purchaser and indicated in the contract, section steel other than those with section shape given in Figures 1~9 may be supplied.
5.2 Dimension, theoretical weight, sectional area and main parameters of section steel
The dimensions, theoretical weight, sectional area and main parameters of section steel are shown in Tables 1~9. As agreed upon between the supplier and the purchaser and indicated in the contract, section steel other than those with dimension given in Table 1~9 may be supplied, with the parameters negotiated between the supplier and the purchaser.
Keys:
b——side width;
t——side thickness;
R——inner arc radius;
Figure 1 Cold-formed equal angle steel (JD)
Keys:
B——long side width;
b——short side width;
t——side thickness;
R——inner arc radius;
Figure 2 Cold-formed unequal angle steel (JB)
Keys:
B——side width;
H——height;
t——side thickness;
R——inner arc radius;
Figure 3 Cold-formed unequal angle steel (CD)
Foreword II
1 Scope
2 Normative references
3 Order contents
4 Classification and code
5 Sectional dimension and permissible deviation
6 Length and permissible deviation
7 Profile
8 Technical requirements
9 Weight
10 Marking example
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 6723-2008 Cold forming sectional steel - Open sectional steel for general structure - Dimensions, shape, weight and permissible tolerances and the following main changes have been made with respect to GB/T 6723-2008:
——The standard name is modified;
——The “order contents” is added;
——The product specification is added;
——The equilateral flanging angle steel is added;
——The technical requirements are added.
This standard was proposed by the China Iron and Steel Association.
This standard is under the jurisdiction of the National Technical Committee on Iron and Steel of Standardization Administration of China (SAC/TC 183).
The previous editions of this standard are as follows:
——GB/T 6723-1986, GB/T 6723-2002 and GB/T 6723-2008.
Cold forming open section steel for general structure
1 Scope
This standard specifies the order contents, classification, code, sectional dimension and permissible deviations, length and permissible deviation, profile, technical requirements, weight and marking example for cold forming open section steel for general structure.
This standard is applicable to cold forming open section steel for general structure (hereinafter referred to as section steel) which is produced from cold-rolled or hot-rolled steel strip on the consecutive roller cold forming units.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 6725 General requirements of cold forming steel sections
3 Order contents
Contracts or orders made based on this standard shall cover the following items:
a) Standard No.;
b) Product name;
c) Grade;
d) Delivery weight;
e) Dimension and profile;
f) Special requirements.
4 Classification and code
The section steel is classified into 9 classes coded respectively as follows:
a) Cold-formed equal angle steel JD;
b) Cold-formed unequal angle steel JB;
c) Cold-formed equilateral channel steel CD;
d) Cold-formed unequal channel steel CB;
e) Cold-formed interior crimping channel steel CN;
f) Cold-formed exterior crimping channel steel CW;
g) Cold-formed Z-shaped steel Z;
h) Cold-formed flanging Z-shaped steel ZJ;
i) Equilateral flanging angle steel JJ.
5 Sectional dimension and permissible deviation
5.1 The section shapes and marking symbols for section steel
The section shapes and marking symbols for section steel are shown in Figures 1~9. As agreed upon between the supplier and the purchaser and indicated in the contract, section steel other than those with section shape given in Figures 1~9 may be supplied.
5.2 Dimension, theoretical weight, sectional area and main parameters of section steel
The dimensions, theoretical weight, sectional area and main parameters of section steel are shown in Tables 1~9. As agreed upon between the supplier and the purchaser and indicated in the contract, section steel other than those with dimension given in Table 1~9 may be supplied, with the parameters negotiated between the supplier and the purchaser.
Keys:
b——side width;
t——side thickness;
R——inner arc radius;
Figure 1 Cold-formed equal angle steel (JD)
Keys:
B——long side width;
b——short side width;
t——side thickness;
R——inner arc radius;
Figure 2 Cold-formed unequal angle steel (JB)
Keys:
B——side width;
H——height;
t——side thickness;
R——inner arc radius;
Figure 3 Cold-formed unequal angle steel (CD)
Contents of GB/T 6723-2017
Foreword II
1 Scope
2 Normative references
3 Order contents
4 Classification and code
5 Sectional dimension and permissible deviation
6 Length and permissible deviation
7 Profile
8 Technical requirements
9 Weight
10 Marking example
