1 Scope
This standard provides common terms and definitions and specifies technical requirements, test methods, inspection rules, marking, packaging, transportation and storage requirements for mobile communication antennas.
This standard is applicable to linearly polarized passive antennas for the frequency range of 25 MHz to 6 000 MHz.
This standard provides the basic principles and minimum requirements to which must be conformed for developing specifications for mobile communication antenna products.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 191
Packaging—Pictorial Marking for Handling of Goods (GB/T 191-2000, eqv ISO 780:1997)
GB/T 2423.1-2001
Environmental Testing for Electric and Electronic Products—Part 2: Test Methods—Test A: Cold (idt IEC 60068-2-1:1990)
GB/T 2423.2-2001
Environmental Testing for Electric and Electronic Products—Part 2: Test Methods—Test B: Dry Heat (idt IEC 60068-2-2:1974)
GB/T 2423.3-1993
Basic Environmental Testing Procedures for Electric and Electronic Products—Test Ca: Damp Heat, Steady State (eqv IEC 60068-2-3:1984)
GB/T 2423.5-1995
Environmental Testing for Electric and Electronic Products—Part 2: Test Methods—Test Ea and Guidance: Shock (idt IEC 60068-2-27:1987)
GB/T 2423.6-1995
Environmental Testing for Electric and Electronic Products—Part 2: Test Methods—Test Eb and Guidance: Bump (idt IEC 60068-2-29:1987)
GB/T 2423.10-1995
Environmental Testing for Electric and Electronic Products—Part 2: Test Methods—Test Fc and Guidance: Vibration (Sinusoidal) (idt IEC 60068-2-6:1982)
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Requirements
4.1 General Structure Requirements
4.2 Technical Requirements for Electrical Property
4.3 Environmental Adaptation Requirements
5 Test Methods
5.1 Test Conditions
5.2 Inspection Method for General Structure Requirements
5.3 Electrical Property Measurement Method
5.4 Environmental Test Requirements and Methods
6 Inspection Rules
6.1 Appraisal Inspection
6.2 Quality Conformity Inspection
7 Marking, Packaging, Transportation and Storage
7.1 Marking
7.2 Packaging
7.3 Transportation
7.4 Storage
Annex A (Informative) Introduction of Antenna Test Field
1 Scope
This standard provides common terms and definitions and specifies technical requirements, test methods, inspection rules, marking, packaging, transportation and storage requirements for mobile communication antennas.
This standard is applicable to linearly polarized passive antennas for the frequency range of 25 MHz to 6 000 MHz.
This standard provides the basic principles and minimum requirements to which must be conformed for developing specifications for mobile communication antenna products.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 191
Packaging—Pictorial Marking for Handling of Goods (GB/T 191-2000, eqv ISO 780:1997)
GB/T 2423.1-2001
Environmental Testing for Electric and Electronic Products—Part 2: Test Methods—Test A: Cold (idt IEC 60068-2-1:1990)
GB/T 2423.2-2001
Environmental Testing for Electric and Electronic Products—Part 2: Test Methods—Test B: Dry Heat (idt IEC 60068-2-2:1974)
GB/T 2423.3-1993
Basic Environmental Testing Procedures for Electric and Electronic Products—Test Ca: Damp Heat, Steady State (eqv IEC 60068-2-3:1984)
GB/T 2423.5-1995
Environmental Testing for Electric and Electronic Products—Part 2: Test Methods—Test Ea and Guidance: Shock (idt IEC 60068-2-27:1987)
GB/T 2423.6-1995
Environmental Testing for Electric and Electronic Products—Part 2: Test Methods—Test Eb and Guidance: Bump (idt IEC 60068-2-29:1987)
GB/T 2423.10-1995
Environmental Testing for Electric and Electronic Products—Part 2: Test Methods—Test Fc and Guidance: Vibration (Sinusoidal) (idt IEC 60068-2-6:1982)
Contents of GB/T 9410-2008
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Requirements
4.1 General Structure Requirements
4.2 Technical Requirements for Electrical Property
4.3 Environmental Adaptation Requirements
5 Test Methods
5.1 Test Conditions
5.2 Inspection Method for General Structure Requirements
5.3 Electrical Property Measurement Method
5.4 Environmental Test Requirements and Methods
6 Inspection Rules
6.1 Appraisal Inspection
6.2 Quality Conformity Inspection
7 Marking, Packaging, Transportation and Storage
7.1 Marking
7.2 Packaging
7.3 Transportation
7.4 Storage
Annex A (Informative) Introduction of Antenna Test Field
