Standard No.:	GB/T 96.1-2002
English Name:	Large series-Product grade A
Chinese Name:	大垫圈 A级
Chinese Classification:	J13    Fastener
Professional Classification:	GB    National Standard
ICS Classification:	21.060.30 21.060.30    Washers, locking elements 21.060.30
Source Content Issued by:	AQSIQ
Issued on:	5-Dec-02
Implemented on:	2003-6-1
Status:	valid
Superseding:	GB/T 96-1985 Plain washers-Large series-Product grades A and C
Target Language:	English
File Format:	PDF
Word Count:	2000 words
Translation Price(USD):	90.0
Delivery:	via email in 1 business day

1 Scope This standard specifies the characteristics of large-series, product-grade-A plain washers in the 200HV and 300HV hardness classes and of nominal sizes (large thread diameters) ranging from 3mm to 36mm inclusive. Washers conforming to this standard are intended for use in cases where soft material pieces are to be clamped or where there are large clearance holes in the workpiece. Nevertheless, in the latter case, the suitability of the washer thickness shall be checked. Washers of hardness class 200HV are suitable for: ——Hexagon bolts and screws of product grades A and B in property classes up to and including 8.8; ——Hexagonal nuts of product grades A and B in property classes up to and including 8; ——Hexagon bolts, screws and nuts of stainless steel and similar chemical composition; ——Case-hardened thread rolling screws. Washers of hardness class 300HV are suitable for: ——Hexagon bolts and screws of product grades A and B in property classes up to and including 10.9; ——Hexagonal nuts of product grades A and B in property classes up to and including 10; If dimensions other than those listed in this standard are required, they should be selected from those given in GB/T 5286.

Contents Foreword I ISO Foreword II 1 Scope 2 Normative References 3 Dimensions 4 Technical Conditions and Normative References 5 Designation