1 Scope
This standard specifies the method to test the hardness of cellular for shoes with durometer.
It is applicable to the determination of hardness of cellular for shoes whose stress is above 0.049 MPa at the compression ratio of 50%.
2 Normative References
The following document contains provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. For any undated reference, the latest edition of the document referred to applies.
GB 2941 Rubber—Standard Temperatures, Humidities and Times for the Conditioning Environmental and Testing of Test Pieces (eqv ISO 471:1983)
3 Principle
The hardness of cellular for shoes is determined by pressing the hemispherical steel indenter into the sample surface under the action of specified test force, and when the indenter foot plane fit closely with the sample surface, measuring the pressed depth of indenter which is then converted to a value to represent the hardness of cellular for shoes.
Foreword i
1 Scope
2 Normative References
3 Principle
4 Apparatus
5 Specimen
6 Conditioning
7 Test Procedure
8 Expression of Results
9 Test Report
1 Scope
This standard specifies the method to test the hardness of cellular for shoes with durometer.
It is applicable to the determination of hardness of cellular for shoes whose stress is above 0.049 MPa at the compression ratio of 50%.
2 Normative References
The following document contains provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. For any undated reference, the latest edition of the document referred to applies.
GB 2941 Rubber—Standard Temperatures, Humidities and Times for the Conditioning Environmental and Testing of Test Pieces (eqv ISO 471:1983)
3 Principle
The hardness of cellular for shoes is determined by pressing the hemispherical steel indenter into the sample surface under the action of specified test force, and when the indenter foot plane fit closely with the sample surface, measuring the pressed depth of indenter which is then converted to a value to represent the hardness of cellular for shoes.
Contents of HG/T 2489-2007
Foreword i
1 Scope
2 Normative References
3 Principle
4 Apparatus
5 Specimen
6 Conditioning
7 Test Procedure
8 Expression of Results
9 Test Report
