This standard specifies the technical conditions of vibration (acceleration) for single-row tapered roller bearings with the nominal outside diameter of 30 mm~200 mm.
Group Z specified in this standard is the basic requirements for the vibration (acceleration) of general bearings; Groups Z1, Z2 and Z3 are applicable to bearings with higher requirements for vibration (acceleration). This standard is applicable to production inspection and user acceptance of tapered roller bearings.
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Requirements
5 Measurement and Evaluation Method
6 Inspection Rules
Appendix A (Informative) Vibration (Acceleration) Limits for Tapered Roller Bearings with 23°<α≤45°
This standard specifies the technical conditions of vibration (acceleration) for single-row tapered roller bearings with the nominal outside diameter of 30 mm~200 mm.
Group Z specified in this standard is the basic requirements for the vibration (acceleration) of general bearings; Groups Z1, Z2 and Z3 are applicable to bearings with higher requirements for vibration (acceleration). This standard is applicable to production inspection and user acceptance of tapered roller bearings.
Contents of JB/T 10237-2014
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Requirements
5 Measurement and Evaluation Method
6 Inspection Rules
Appendix A (Informative) Vibration (Acceleration) Limits for Tapered Roller Bearings with 23°<α≤45°
