1 Scope
This standard specifies the safety requirements for the design, manufacture and use of S/R machine.
This standard is applicable to S/R machine used in stereoscopic warehouse (hereinafter referred to as "S/R machine").
2 Normative References
The following documents are indispensable for the application of this standard. For dated references, the dated edition applies to this document. For undated references, the latest edition of the referenced document (including any amendments) applies.
Contents
Foreword I
1 Scope
2 Normative References
3 General Requirements
4 Safety Requirements for Structure Design
4.1 General Requirements
4.2 Requirements for Cabin Design
4.3 Operating Desk
4.4 Vertical Ladder
4.5 Brake
4.6 Drum
4.7 Bearing Steel Wire Rope (or Bearing Chain)
4.8 Safety Requirements for Electric Equipment
5 Safety Requirements for the Travelling of Two or More S/R Machines in the Same Laneway
6 Requirements for Protective Devices
6.1 Drop Preventing Device for Carriage
6.2 Load Capacity Limiter
6.3 Safe Device against Slack Rope
6.4 Safety Protection for Shuttle Mechanism
6.5 Lifting End Limiter
6.6 Travel End Limiter
6.7 Speed Limiter (Forced Speed Selector Switch)
6.8 Shuttle Extension (Tertaction) Limiter
6.9 Shuttle Overtravel Stop / Mechanical Stop
6.10 Scram Button
6.11 Electric Interlock Protection
6.12 Sound and Light Alarm Device
6.13 Load Location Detector
6.14 Storage Location Detector
6.15 Clamp
6.16 Runway Cleaner
7 Safety Signs
7.1 General Requirements
7.2 Warning Signs
7.3 Other Signs
8 Operating Requirements
8.1 Requirements for Drivers
8.2 Requirements for Users
1 Scope
This standard specifies the safety requirements for the design, manufacture and use of S/R machine.
This standard is applicable to S/R machine used in stereoscopic warehouse (hereinafter referred to as "S/R machine").
2 Normative References
The following documents are indispensable for the application of this standard. For dated references, the dated edition applies to this document. For undated references, the latest edition of the referenced document (including any amendments) applies.
Contents of JB/T 11269-2011
Contents
Foreword I
1 Scope
2 Normative References
3 General Requirements
4 Safety Requirements for Structure Design
4.1 General Requirements
4.2 Requirements for Cabin Design
4.3 Operating Desk
4.4 Vertical Ladder
4.5 Brake
4.6 Drum
4.7 Bearing Steel Wire Rope (or Bearing Chain)
4.8 Safety Requirements for Electric Equipment
5 Safety Requirements for the Travelling of Two or More S/R Machines in the Same Laneway
6 Requirements for Protective Devices
6.1 Drop Preventing Device for Carriage
6.2 Load Capacity Limiter
6.3 Safe Device against Slack Rope
6.4 Safety Protection for Shuttle Mechanism
6.5 Lifting End Limiter
6.6 Travel End Limiter
6.7 Speed Limiter (Forced Speed Selector Switch)
6.8 Shuttle Extension (Tertaction) Limiter
6.9 Shuttle Overtravel Stop / Mechanical Stop
6.10 Scram Button
6.11 Electric Interlock Protection
6.12 Sound and Light Alarm Device
6.13 Load Location Detector
6.14 Storage Location Detector
6.15 Clamp
6.16 Runway Cleaner
7 Safety Signs
7.1 General Requirements
7.2 Warning Signs
7.3 Other Signs
8 Operating Requirements
8.1 Requirements for Drivers
8.2 Requirements for Users
