Standard No.:	JB/T 3632-2005
English Name:	Rolling bearings - Full complement taperred roller thrust bearings for rolling mill screw-down mechanisms
Chinese Name:	滚动轴承 轧机压下机构用满装圆锥滚子推力轴承
Chinese Classification:	J11    Rolling bearing
Professional Classification:	JB    Professional Standard - Machinery
ICS Classification:	21.100.20 21.100.20    Rolling bearings 21.100.20
Source Content Issued by:	NDRC
Issued on:	2005-9-23
Implemented on:	2006-1-1
Status:	superseded
Superseded by:	JB/T 3632-2015 Rolling bearings---Full complement tapered roller thrust bearings for rolling mill screw-down mechanis
Superseded on:	2016-3-1
Superseding:	JB/T 3632-1993
Target Language:	English
File Format:	PDF
Word Count:	2000 words
Translation Price(USD):	90.0
Delivery:	via email in 1 business day

Rolling Bearings - Full Complement Tapered Roller Thrust Bearings for Rolling Mill Screw-down Mechanisms 滚动轴承 轧机压下机构用满装圆锥滚子推力轴承 1. Scope This standard specifies the structural type, identification code, boundary dimensions, technical requirements, inspection and measuring methods, inspection rules, marking and package for the full complement tapered roller thrust bearings for rolling mill screw-down mechanisms (hereinafter referred to as bearings). 2. Normative References The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies. GB/T 307.2-2005 Rolling Bearings - Measuring and Gauging Principles and Methods (ISO 1132-2:2001, Rolfing Bearings - Tolerances - Part 2: Measuring and Gauging Principles and Methods, MOD) GB/T 3203-1982 Specification for Carburizing Steels of Bearings GB/T 8597-2003 Rolling Bearings - Rust Proof Packaging GB/T 15822-1995 Methods for Magnetic Particle Testing GB/T 18254-2002 High-carbon Chromium Bearing Steel JB/T 1255-2001 Specification for Heat-treatment of Rolling Bearing Parts Made from High Carbon Chromium Steel JB/T 2974-1993 Rolling Bearing - Identification Code - Supplemental Regulations JB/T 3574-1997 Rolling Bearings - Marking for Products JB/T 664l-1993 Rolling Bearings - Residual Magnetism and Its Assessment Method JB/T 8881-2001 Specifications for Carburizing Heat Treatment of Rolling Bearing Parts JB/T 8921-1999 Rolling Bearings and Commercial Parts - Inspection Rules 3. Terms and Definitions The following terms and definitions shall apply to this standard. 3.1 Spherical washer Bearing washer with back face of convex spherical surface or concave spherical surface. 3.2 Housing washer Another bearing washer opposite to the spherical washer. 4. Symbols (See Figure 1 and Figure 2)

Foreword I 1. Scope 2. Normative References 3. Terms and Definitions 4. Symbols (See Figure 1 and Figure 2) 5. Structural Type and Code 5.1 Structural Type Figure 1 Type TTSV000 Figure 2 Type TTSX000 5.2 Identification Code 6. Boundary Dimensions Table 1 Boundary Dimension 7. Technical Requirements 7.1 Material and Heat Treatment 7.2 Tolerance Table 2 Tolerance 7.3 Surface Roughness Table 3 Surface Roughness 7.4 Residual Magnetism Table 4 Residual Magnetism Value 7.5 Other Technical Requirements 8. Inspection and Measuring Methods as well as Inspection Rules 8.1 Inspection and Measuring Methods 8.2 Inspection Rules Table 5 Inspection Items 9. Marking 10. Packaging