1 Scope
This standard specifies the specifications, inspection methods and inspection rules, etc. of the phenolic laminated cloth cage used for rolling bearings (hereinafter referred to as cage).
This standard is applicable to the manufacture, inspection and user acceptance of cage.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies
Foreword I
1 Scope
2 Normative References
3 Symbols and Definitions
4 Technical Requirements
4.1 Material
4.2 Structural Type
4.3 Dimension and Tolerance
4.4 Form and Position Tolerance
4.5 Surface Quality
4.6 Other Technical Requirements
5 Inspection Methods
5.1 Dimension and Tolerance and Shape and Position Tolerance of Cage
5.2 Surface Quality
6 Inspection Rules
7 Packaging, Marking and Storage
Appendix A (Normative) Rolling Bearings-Phenolic Laminated Cloth-Specifications
A.1 Scope
A.2 Terms and Definitions
A.3 Technical Requirements
A.4 Measurement and Test Methods
A.5 Inspection Rules
A.6 Marking, Packaging, Transport and Storage
1 Scope
This standard specifies the specifications, inspection methods and inspection rules, etc. of the phenolic laminated cloth cage used for rolling bearings (hereinafter referred to as cage).
This standard is applicable to the manufacture, inspection and user acceptance of cage.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies
Contents of JB/T 4037-2007
Foreword I
1 Scope
2 Normative References
3 Symbols and Definitions
4 Technical Requirements
4.1 Material
4.2 Structural Type
4.3 Dimension and Tolerance
4.4 Form and Position Tolerance
4.5 Surface Quality
4.6 Other Technical Requirements
5 Inspection Methods
5.1 Dimension and Tolerance and Shape and Position Tolerance of Cage
5.2 Surface Quality
6 Inspection Rules
7 Packaging, Marking and Storage
Appendix A (Normative) Rolling Bearings-Phenolic Laminated Cloth-Specifications
A.1 Scope
A.2 Terms and Definitions
A.3 Technical Requirements
A.4 Measurement and Test Methods
A.5 Inspection Rules
A.6 Marking, Packaging, Transport and Storage
