1 Scope
This part specifies the basic parameters of machinery vibrating stress relief device.
This part is applicable to the machinery vibrating stress relief device (hereinafter referred to as device) of castings, forgings, welding parts, molds and machining parts made of carbon structural steel, low-alloy steel, stainless steel, cast iron, nonferrous metals (copper, aluminum, titanium and their alloys) and other materials.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of JB/T 5925. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this part. However parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
JB/T 3000 Model Formulating Means of Foundry Machinery
3 Basic Parameters
3.1 The main parameter of device is rated speed.
3.2 The basic sparameters of device shall be in accordance with those specified in Table
Foreword I
1 Scope
2 Normative References
3 Basic Parameters
1 Scope
This part specifies the basic parameters of machinery vibrating stress relief device.
This part is applicable to the machinery vibrating stress relief device (hereinafter referred to as device) of castings, forgings, welding parts, molds and machining parts made of carbon structural steel, low-alloy steel, stainless steel, cast iron, nonferrous metals (copper, aluminum, titanium and their alloys) and other materials.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of JB/T 5925. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this part. However parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
JB/T 3000 Model Formulating Means of Foundry Machinery
3 Basic Parameters
3.1 The main parameter of device is rated speed.
3.2 The basic sparameters of device shall be in accordance with those specified in Table
Contents of JB/T 5925.1-2005
Foreword I
1 Scope
2 Normative References
3 Basic Parameters
