1 Scope
This standard specifies the structural type, connecting mode, basic parameters, model, technical requirements, test methods, inspection rules, mark, packing and storage of the contact-type level controller and the radio frequency level controller for the electrostatic precipitator.
This standard is applicable to the contact-type level controller and radio frequency admittance level controller for quantitative discharging of the ash hopper of the self-controlled electrostatic precipitator.
This standard is also applicable to other mechanical level control switches, rotary level controller and capacitive material-level controller.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any amendments), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Foreword I
1 Scope
2 Normative References
3 Structural Types, Connecting Modes, Basic Parameters and Models
3.1 Structural Types
3.2 Connecting Modes
3.3 Basic Parameters
3.4 Product Models
4 Technical Requirements
4.1 Operation
4.2 Action Delay Time
4.4 Medium Temperature
4.5 Seal and Dust Proof
4.6 Insulation Property
4.7 Vibration Resistance Property
4.8 Packing and Transport Properties
4.9 Appearance
5 Test Methods
5.1 Operation Test
5.2 Action Time Delay Test
5.3 Electrifying Property Test of the Contact Point
5.4 Medium Temperature Test
5.5 Seal and Dustproof Inspection
5.6 Insulating Property Test
5.7 Vibration Resistance Property Test
5.8 Property Test of Packing and Transport
5.9 Appearance Inspection
6 Inspection Rules
6.1 Delivery Inspection
6.2 Type Inspection
7 Mark, Packing and Storage
7.1 Mark
7.2 Packing
7.3 Storage
Table 1 Basic Parameters of Contact-type Level Controller
Table 2 Basic Parameters of Radio Frequency Admittance Level Controller
Table 3 Basic Parameter of Materials
Table 4 Basic Parameters of Environmental Conditions
1 Scope
This standard specifies the structural type, connecting mode, basic parameters, model, technical requirements, test methods, inspection rules, mark, packing and storage of the contact-type level controller and the radio frequency level controller for the electrostatic precipitator.
This standard is applicable to the contact-type level controller and radio frequency admittance level controller for quantitative discharging of the ash hopper of the self-controlled electrostatic precipitator.
This standard is also applicable to other mechanical level control switches, rotary level controller and capacitive material-level controller.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any amendments), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Contents of JB/T 8625-2008
Foreword I
1 Scope
2 Normative References
3 Structural Types, Connecting Modes, Basic Parameters and Models
3.1 Structural Types
3.2 Connecting Modes
3.3 Basic Parameters
3.4 Product Models
4 Technical Requirements
4.1 Operation
4.2 Action Delay Time
4.4 Medium Temperature
4.5 Seal and Dust Proof
4.6 Insulation Property
4.7 Vibration Resistance Property
4.8 Packing and Transport Properties
4.9 Appearance
5 Test Methods
5.1 Operation Test
5.2 Action Time Delay Test
5.3 Electrifying Property Test of the Contact Point
5.4 Medium Temperature Test
5.5 Seal and Dustproof Inspection
5.6 Insulating Property Test
5.7 Vibration Resistance Property Test
5.8 Property Test of Packing and Transport
5.9 Appearance Inspection
6 Inspection Rules
6.1 Delivery Inspection
6.2 Type Inspection
7 Mark, Packing and Storage
7.1 Mark
7.2 Packing
7.3 Storage
Table 1 Basic Parameters of Contact-type Level Controller
Table 2 Basic Parameters of Radio Frequency Admittance Level Controller
Table 3 Basic Parameter of Materials
Table 4 Basic Parameters of Environmental Conditions
