This standard specifies the requirements in classification, technical requirements, testing method, inspection rules, marking, packaging, transportation and storage of glass beads for road glistening marking materials.
This standard is applicable to transparent colorless glass beads used for improving conversed glistening performance of road-marking coating.
2 Normative References
The provisions of the following standard, through reference into this standard, constitute provisions of this standard. The editions indicated are valid when this standard is published. All standards are subject to revision, and parties under this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below.
Contents 1 Scope 2 Normative References 3 Definition 4 Classification and Material of Products 5 Technical Conditions 6 Test Method 7 Inspection Rules 8 Packaging, Marking Transportation and Storage Appendix A (Suggestive) Table of Comparison for Mesh Size and Number of Standard Sieves
JT/T 446-2001, JT 446-2001, JTT 446-2001, JT/T446-2001, JT/T 446, JT/T446, JT446-2001, JT 446, JT446, JTT446-2001, JTT 446, JTT446
Introduction of JT/T 446-2001
1 Scope
This standard specifies the requirements in classification, technical requirements, testing method, inspection rules, marking, packaging, transportation and storage of glass beads for road glistening marking materials.
This standard is applicable to transparent colorless glass beads used for improving conversed glistening performance of road-marking coating.
2 Normative References
The provisions of the following standard, through reference into this standard, constitute provisions of this standard. The editions indicated are valid when this standard is published. All standards are subject to revision, and parties under this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below.
Contents of JT/T 446-2001
Contents
1 Scope
2 Normative References
3 Definition
4 Classification and Material of Products
5 Technical Conditions
6 Test Method
7 Inspection Rules
8 Packaging, Marking Transportation and Storage
Appendix A (Suggestive) Table of Comparison for Mesh Size and Number of Standard Sieves
