Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard is a revision of QB/T 1619-2006 Wallet.
In addition to a number of editorial changes, the following technical changes have been made with respect to QB/T 1619-2006:
——The “Scope” is adjusted, with the application scope of this standard extended;
——The requirements and test methods for “Raw material and fittings” are added;
——The “Appearance quality and sewing requirements” are adjusted; the requirements for “Superior products” are deleted;
——The requirements for “Physical and mechanical properties” are adjusted and detailed; the requirements for “Corrosion resistance of hardware fittings” are added;
——The requirements for “Marking” are adjusted;
——The Annex A - “Common Wallets and Schematic Diagrams for Positions” is added;
——The Annex B - “Test Method for Colour Fastness to Rotary Rubbing” is added;
——The Annex C - “Special Type Inspection” is added.
This standard was proposed by China National Light Industry Council.
This standard is under the jurisdiction of National Technical Committee on Leather of Standardization Administration of China (SAC/TC 252).
This standard replaces the former light industry standard QB/T 1619-2006 Wallet, which is abolished from the implementation date of this standard.
The previous editions of standard are as follows:
——QB/T 1619-2006;
——QB/T 1619-1992.
Wallet
1 Scope
This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of wallet.
This standard is applicable to various wallets made of materials such as leather, fur, recycled leather, artificial/synthetic leather and textile. This standard may be referred to for cell-phone case.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 251 Textiles - Tests for Colour Fastness - Gray Scale for Assessing Staining
GB/T 2912.1 Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolyzed Formaldehyde (Water Extraction Method)
GB/T 17592 Textiles - Determination of the Banned Azo Colourants
GB 19340 Adhesives for Footwear and Case and Bag
GB/T 19941 Leather and Fur - Chemical Tests - Determination of Formaldehyde Content
GB/T 19942 Leather and Fur - Chemical Tests - Determination of Banned Azo Colourants
GB 20400 Leather and Fur - Limit of Harmful Matter
GB 21550 The Restriction of Hazardous Materials in Polyvinyl Chloride Artificial Leather
GB/T 22889 Leather - Physical and Mechanical Tests - Determination of Surface Coating Thickness
GB/T 29865 Textiles - Tests for Colour Fastness - Colour Fastness to Rubbing - Small Areas
QB/T 1586.1 Hardware Fitting of Case and Bag - Case-lock
QB/T 2002.1 Leather Hardware Fitting - Technical Conditions of Galvanized Coating
QB/T 2002.2 Leather Hardware Fitting - Technical Conditions of Surface Spray Painting
QB/T 2171 Metal Zipper
QB/T 2172 Derlin Zipper
QB/T 2173 Nylon zipper
QB/T 2790 Dyeing Fur - Testing Method for Colour Fastness to Rubbing
QB/T 3826 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products - Neutral Salt Spraying Test (NSS)
QB/T 5085 Hardware Fitting of Case and Bag - Magnetic Buckle
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
inside
an interior component of wallet
3.2
pocket
internal interlayer of the inside
3.3
pleat
a shape of wrinkled round corner
3.4
snaps
fittings functioning for opening and closing
3.5
frame
metal mouth inlaid at the opening
4 Product Classification
4.1 They are classified into leather wallet, fur wallet, reclaimed leather wallet, artificial/synthetic leather wallet, textile wallet, etc. by surface materials.
4.2 They are classified into frame wallet, suit wallet, purse, documents holders, key case, business card holder, etc. by varieties (see Annex A for common wallets and schematic diagram for positions).
5 Requirements
5.1 Raw material and fittings
They shall be selected in accordance with relevant product standard.
5.1.1 Limit of harmful matters
The limit of harmful matters in leather, fur, reclaimed leather and textile materials shall meet the requirements of Table 1; that in polyvinyl chloride artificial leather shall meet the requirements of GB 21550; that in adhesive for wallets shall meet the requirements of Table 2.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
5 Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
Annex A (Informative) Common Wallets and Schematic Diagram for Positions
Annex B (Normative) Test Method for Colour Fastness to Rotary Rubbing
Annex C (Normative) Special Type Inspection
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard is a revision of QB/T 1619-2006 Wallet.
In addition to a number of editorial changes, the following technical changes have been made with respect to QB/T 1619-2006:
——The “Scope” is adjusted, with the application scope of this standard extended;
——The requirements and test methods for “Raw material and fittings” are added;
——The “Appearance quality and sewing requirements” are adjusted; the requirements for “Superior products” are deleted;
——The requirements for “Physical and mechanical properties” are adjusted and detailed; the requirements for “Corrosion resistance of hardware fittings” are added;
——The requirements for “Marking” are adjusted;
——The Annex A - “Common Wallets and Schematic Diagrams for Positions” is added;
——The Annex B - “Test Method for Colour Fastness to Rotary Rubbing” is added;
——The Annex C - “Special Type Inspection” is added.
This standard was proposed by China National Light Industry Council.
This standard is under the jurisdiction of National Technical Committee on Leather of Standardization Administration of China (SAC/TC 252).
This standard replaces the former light industry standard QB/T 1619-2006 Wallet, which is abolished from the implementation date of this standard.
The previous editions of standard are as follows:
——QB/T 1619-2006;
——QB/T 1619-1992.
Wallet
1 Scope
This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of wallet.
This standard is applicable to various wallets made of materials such as leather, fur, recycled leather, artificial/synthetic leather and textile. This standard may be referred to for cell-phone case.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 251 Textiles - Tests for Colour Fastness - Gray Scale for Assessing Staining
GB/T 2912.1 Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolyzed Formaldehyde (Water Extraction Method)
GB/T 17592 Textiles - Determination of the Banned Azo Colourants
GB 19340 Adhesives for Footwear and Case and Bag
GB/T 19941 Leather and Fur - Chemical Tests - Determination of Formaldehyde Content
GB/T 19942 Leather and Fur - Chemical Tests - Determination of Banned Azo Colourants
GB 20400 Leather and Fur - Limit of Harmful Matter
GB 21550 The Restriction of Hazardous Materials in Polyvinyl Chloride Artificial Leather
GB/T 22889 Leather - Physical and Mechanical Tests - Determination of Surface Coating Thickness
GB/T 29865 Textiles - Tests for Colour Fastness - Colour Fastness to Rubbing - Small Areas
QB/T 1586.1 Hardware Fitting of Case and Bag - Case-lock
QB/T 2002.1 Leather Hardware Fitting - Technical Conditions of Galvanized Coating
QB/T 2002.2 Leather Hardware Fitting - Technical Conditions of Surface Spray Painting
QB/T 2171 Metal Zipper
QB/T 2172 Derlin Zipper
QB/T 2173 Nylon zipper
QB/T 2790 Dyeing Fur - Testing Method for Colour Fastness to Rubbing
QB/T 3826 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products - Neutral Salt Spraying Test (NSS)
QB/T 5085 Hardware Fitting of Case and Bag - Magnetic Buckle
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
inside
an interior component of wallet
3.2
pocket
internal interlayer of the inside
3.3
pleat
a shape of wrinkled round corner
3.4
snaps
fittings functioning for opening and closing
3.5
frame
metal mouth inlaid at the opening
4 Product Classification
4.1 They are classified into leather wallet, fur wallet, reclaimed leather wallet, artificial/synthetic leather wallet, textile wallet, etc. by surface materials.
4.2 They are classified into frame wallet, suit wallet, purse, documents holders, key case, business card holder, etc. by varieties (see Annex A for common wallets and schematic diagram for positions).
5 Requirements
5.1 Raw material and fittings
They shall be selected in accordance with relevant product standard.
5.1.1 Limit of harmful matters
The limit of harmful matters in leather, fur, reclaimed leather and textile materials shall meet the requirements of Table 1; that in polyvinyl chloride artificial leather shall meet the requirements of GB 21550; that in adhesive for wallets shall meet the requirements of Table 2.
Contents of QB/T 1619-2018
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
5 Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
Annex A (Informative) Common Wallets and Schematic Diagram for Positions
Annex B (Normative) Test Method for Colour Fastness to Rotary Rubbing
Annex C (Normative) Special Type Inspection
