1 Scope
This standard specifies the technical requirements, test methods and inspection rules for electric window regulators of automobile.
This standard is applicable to rope wheel electric window regulators with a nominal voltage of 12 V, and may also serve as a reference for other types of electric window regulators (such as gear arm electric window regulators, flexible shaft electric window regulators, etc.).
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, all editions cited are valid. All standards are subject to revision, and all parties using this standard are encouraged to investigate the possibility of applying the latest editions of the following standards.
GB/T 2423.17-1981 Basic environmental testing procedures for electric and electronic products - Test Ka: Salt mist
GB/T 2828-1987 Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches)
GB/T 4942.2-1985 Degrees of protection provided by enclosures for low-voltage apparatus
QC/T 413-1999 Basic specifications for automotive electrical equipment
ISO 7637-1:1990 Road vehicles - Electrical disturbance by conduction and coupling - Part 1: Passenger cars and light commercial vehicles with nominal 12 V supply voltage - Electrical transient conduction along supply lines only
3 Definitions
For the purposes of this standard, the following definitions apply.
Foreword i
1 Scope
2 Normative references
3 Definitions
4 Technical requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transport and storage
Standard
QC/T 636-2000 Motor-driven window lifter of automobile (English Version)
1 Scope
This standard specifies the technical requirements, test methods and inspection rules for electric window regulators of automobile.
This standard is applicable to rope wheel electric window regulators with a nominal voltage of 12 V, and may also serve as a reference for other types of electric window regulators (such as gear arm electric window regulators, flexible shaft electric window regulators, etc.).
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, all editions cited are valid. All standards are subject to revision, and all parties using this standard are encouraged to investigate the possibility of applying the latest editions of the following standards.
GB/T 2423.17-1981 Basic environmental testing procedures for electric and electronic products - Test Ka: Salt mist
GB/T 2828-1987 Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches)
GB/T 4942.2-1985 Degrees of protection provided by enclosures for low-voltage apparatus
QC/T 413-1999 Basic specifications for automotive electrical equipment
ISO 7637-1:1990 Road vehicles - Electrical disturbance by conduction and coupling - Part 1: Passenger cars and light commercial vehicles with nominal 12 V supply voltage - Electrical transient conduction along supply lines only
3 Definitions
For the purposes of this standard, the following definitions apply.
Contents of QC/T 636-2000
Foreword i
1 Scope
2 Normative references
3 Definitions
4 Technical requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transport and storage
