General specification for the fuse antenna on missile
1 Scope
This specification specifies the requirements, quality assurance requirements and delivery preparations of fuse antenna on missile (hereinafter referred to as “fuse antenna”).
This specification is applicable to the design, production, inspection and acceptance of fuse antenna on ground-to-air missile and ground-to-ground missile.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this specification. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this specification are encouraged to investigate the possibility of applying the most recent editions of the documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB 191-2000 Packaging - Pictorial marking for handling of goods
GJB 150.2-1986 Environmental test methods for military equipments - Low pressure (altitude) test
GJB 150.3-1986 Environmental test methods for military equipments - High temperature test
GJB 150.4-1986 Environmental test methods for military equipments - Low temperature test
GJB 150.11-1986 Environmental test methods for military equipments - Salt fog test
GJB 150.15-1986 Environmental test methods for military equipments - Acceleration test
GJB 150.16-1986 Environmental test methods for military equipments - Vibration test
GJB 150.18-1986 Environmental test methods for military equipments - Shock test
GJB 1706-1993 General specification for missile antennas
QJ 450 Thickness series and selection principle for plating and conversion coatings of metallic parts
QJ/T 815.2-1994 Product road transportation - Accelerated simulation test methods
QJ 1239.8-1987 Environmental test conditions and methods for electronic equipment - Damp heat test
QJ 1729A-1996 Test methods for aerospace antenna
3 Requirements
3.1 General
The fuse antenna shall meet all the requirements specified in this specification and corresponding specific specifications. In case of any inconsistency between this specification and the specific specifications, the latter shall prevail.
3.2 Dimensions
The fuse antenna shall be small in size and low in profile. The specific dimensions shall meet the requirements of specific specifications.
General specification for the fuse antenna on missile
1 Scope
This specification specifies the requirements, quality assurance requirements and delivery preparations of fuse antenna on missile (hereinafter referred to as “fuse antenna”).
This specification is applicable to the design, production, inspection and acceptance of fuse antenna on ground-to-air missile and ground-to-ground missile.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this specification. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this specification are encouraged to investigate the possibility of applying the most recent editions of the documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB 191-2000 Packaging - Pictorial marking for handling of goods
GJB 150.2-1986 Environmental test methods for military equipments - Low pressure (altitude) test
GJB 150.3-1986 Environmental test methods for military equipments - High temperature test
GJB 150.4-1986 Environmental test methods for military equipments - Low temperature test
GJB 150.11-1986 Environmental test methods for military equipments - Salt fog test
GJB 150.15-1986 Environmental test methods for military equipments - Acceleration test
GJB 150.16-1986 Environmental test methods for military equipments - Vibration test
GJB 150.18-1986 Environmental test methods for military equipments - Shock test
GJB 1706-1993 General specification for missile antennas
QJ 450 Thickness series and selection principle for plating and conversion coatings of metallic parts
QJ/T 815.2-1994 Product road transportation - Accelerated simulation test methods
QJ 1239.8-1987 Environmental test conditions and methods for electronic equipment - Damp heat test
QJ 1729A-1996 Test methods for aerospace antenna
3 Requirements
3.1 General
The fuse antenna shall meet all the requirements specified in this specification and corresponding specific specifications. In case of any inconsistency between this specification and the specific specifications, the latter shall prevail.
3.2 Dimensions
The fuse antenna shall be small in size and low in profile. The specific dimensions shall meet the requirements of specific specifications.
