Detail of SN/T 3611-2013

Introduction of SN/T 3611-2013

1 Scope This standard specifies the terms, definitions, classification, safety requirements, test methods and test results for fixed or folding reclined cradles intended for children up to a weight of 9 kg or who are unable to sit up unaided. This standard is applicable to reclined cradle exported to EU for children's use, and similar products produced or sold in China may also be used with reference. This standard applies also to car seats complying with ECE 44 that can be used as reclined cradles according to manufacturer’s instructions. This standard does not apply to reclined cradles when used as swings. If a reclined cradle has several functions or can be converted into another function, the relevant standards shall apply to it (see Annex B). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 531.1 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Duromerer method (Shore hardness) CB/T 531.2 Rubber vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method GB/T 2411 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) GB/T 5456 Textiles - Burning behaviour - Flame spread properties of vertically oriented specimens GB/T 6031 Rubber, vulcanized or thermoplastic Determination of hardness(hardness between 10 IRHD and 100 IRHD) GB 6675 National safety technical code for toys GB/T 8629 Textiles - Domestic washing and drying procedures for textile testing ECE 44 Regulation No 44 of the Economic Commission for Europe of the United Nations (UN/ECE) - Restraining devices for child occupants of power-driven vehicles (Child restraint system) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 reclined cradle article intended to accommodate a child in a reclined position Note: Reclined cradles may be static, rocking or bouncing and may have an adjustable backrest and/or seat. 3.1.1 static reclined cradle article not intended to rock or bounce 3.1.2 rocking reclined cradle article intended to allow the child to rock 3.1.3 bouncing reclined cradle article intended to allow the child to bounce due to the flexibility of the frame or any other mechanical means 3.2 restraint system system to restrain the child within the reclined cradle 3.3 crotch restraint device designed to pass between the child’s legs to prevent the child from sliding forward 3.4 carrying handle component to enable the reclined cradle with the child in it to be carried by hand 3.5 junction line intersection of the seat and the backrest Note 1: See Figure 1a).

Contents of SN/T 3611-2013

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Technical requirements 5 Test methods 6 Product information 7 Waterproof packaging 8 Others Annex A (informative) Relevant standards and recommendations for multi purpose reclined cradles Annex B (informative) Test method for flame retardance of reclined cradles