Detail of YB/T 5092-2005

Introduction of YB/T 5092-2005

1 Scope This standard specifies classification, dimensions, appearance, technical requirements, test methods, inspection rules, packing, marking, quality certificate and others issues of stainless steel wires for welding. This standard is applicable to stainless steel wires for welding electrode core wire, gas-shielded arc welding, submerged arc welding, electroslag welding, etc. 2 Normative References The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, all subsequent modifications (excluding correction contents) or revisions are not applicable to this standard. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies. GB/T 222-1984 Method of Sampling Steel for Determination of Chemical Composition and Permissible Variations for Product Analysis GB/T 223.3 Methods for Chemical Analysis of Iron, Steel and Alloy-The Diantipyrylmethane Phosphomolybdate Gravimetric Method for the Determination of Phosphorus Content GB/T 223.4 Methods for Chemical Analysis of Iron, Steel and Alloy - The Volumetric Method for Determination of Manganese Content by Ammonium Nitrate Oxidation GB/T 223.11 Methods for Chemical Analysis of Iron, Steel and Alloy-The Ammonium Persulfate Oxidation Volumetric Method for the Determination of Chromium Content GB/T 223.13 Methods for Chemical Analysis of Iron, Steel and Alloy -The Ammonium Ferrous Sulfate Titration Method for the Determination of Vanadium Content GB/T 223.17 Methods for Chemical Analysis of Iron, Steel and Alloy - The Diantipyrylmethane Photometric Method for the Determination of Titanium Content GB/T 223.18 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Thiosulfate Separation Iodimetric Method for the Determination of Copper Content GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy - The Neocuproine-chloroform Extraction Photometric Method for the Determination of Copper Content GB/T 223.23 Methods for Chemical Analysis of Iron, Steel and Alloy - The Dimethylglyoxime Spectrophotometric Method for the Determination of Nickel Content GB/T 223.25 Methods for Chemical Analysis of Iron, Steel and Alloy - The Dimethylglyoxime Gravimetric Method for the Determination of Nickel Content GB/T 223.26 Methods for Chemical Analysis of Iron, Steel and Alloy - The Thiocyanate Direct Photometric Method for the Determination of Molybderum Content GB/T 223.27 Methods for Chemical Analysis of Iron, Steel and Alloy - The Thiocyanate-Butyl Acetate Extraction Spectrophotometric Method for the Determination of Molybdenum Content GB/T223.28 Methods for Chemical Analysis of Iron, Steel and Alloy - The D-denzoinoxime Gravimetric Method for the Determination of Molybdenum Content GB/T 223.36 Methods for Chemical Analysis of Iron, Steel and Alloy - The Neutral Titration Method for the Determinaion of Nitrogen Content after Distillation Separation GB/T 223.40 Methods for chemical analysis of iron, steel and alloy - The anion-exchange separation - sulphochlorophenol S photometric method for the determination of niobium content GB/T 223.58 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Arsenite-sodium Nitrite Titrimetric Method for the Determination of Manganese Content GB/T 223.59 Methods for chemical analysis of iron, steel and alloy - The reduced molybdoantimonyl phosphoric acid photometric method for the determination of phosphorus content GB/T 223.60 Methods for Chemical Analysis of Iron, Steel and Alloy - The Perchloric Acid Dehydration Gravimetric Method for the Determination of Silicon Content GB/T 223.62 Methods for Chemical Analysis of Iron, Steel and Alloy - The Butyl Acetate Extraction Photometric Method for the Determination of Phosphorus Content GB/T 223.63 Methods for chemical analysis of iron, steel and alloy - The sodium (potassium) periodate photometric method for the determination of manganese content GB/T 223.67 Methods for Chemical Analysis of Iron, Steel and Alloy - The Reducing Distillation-methylene Blue Photometric Method for the Determination of Sulfur Content GB/T 223.68 Methods for Chemical Analysis of Iron, Steel and Alloy - The Potassium Iodate Titration Method after Combustion in the Pipe Furnace for the Determination of Sulfur Content GB/T 223.69 Methods for Chemical Analysis of Iron, Steel and Alloy - The Gravimetric Method after Combustion in the Pipe Furnace for the Determination of Carbon Content GB/T 223.71 Methods for chemical analysis of iron, steel and alloy - The gravimetric method after combustion in the pipe furnace for the determination of carbon content GB/T 223.72 Methods for Chemical Analysis of Iron, Steel and Alloy - The Alumina Chromatographic Separation - barium Sulfate Gravimetric Method for the Determination of Sulphur Content GB/T 228 Metallic Materials - Tensile Testing at Ambient Temperature (GB/T 228-2002, ISO 6892:1998, eqv) GB/T 2103-1988 General Provisions for Checking, Packing, Marking and Quality Certification of Steel Wire GB/T 11170 Method for Photoelectric Emission Spectroscopic Analysis of Stainless Steel 3 Classification and Designation 3.1 Classification by structure state and designation of steel wires are detailed in Table 1.

Contents of YB/T 5092-2005

Contents 1 Scope 2 Normative References 3 Classification and Designation 4 Ordering information 5 Dimension and Appearance 6 Technical Requirements 7 Test Methods 8 Test rules 9 Packing, Marking and Quality Certificate Appendix A (Informative) Comparison of Designations between This Standard and Some Foreign Standards Appendix B (Informative) Main Purpose of Designations