Detail of YD/T 1214-2006

Introduction of YD/T 1214-2006

Technical Requirement of 900/1800MHz TDMA Digital Cellular Mobile Telecommunication Network General Packet Radio Service (GPRS) Equipment: Mobile Stations 1 Scope This standard specifies the requirements of mobile stations (MS) supporting General Packet Radio Service (GPRS) in 900/1800 MHz TDMA digital cellular mobile telecommunication network in terms of service, function, performance, interface, electromagnetic compatibility and environmental adaptability. This standard is applicable to mobile stations (MS) supporting General Packet Radio Service (GPRS) and GSM mobile stations not supporting GPRS in 900/1800MHz TDMA digital cellular mobile telecommunication network; the technical requirements other than those related to General Packet Radio Service (GPRS) are applicable to GSM mobile stations that do not support GPRS. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 18287 General specification of lithium-ion battery for cellular phone GB/T 18288 General specification of nickel-metal hydride battery for cellular phone GB/T 18289 General specification of nickel-cadmium battery for cellular phone YD 1268 The safety specification and test method for lithium batteries and charger YD/T 965 Safety requirements and test method for user equipment Technical requirements and testing methods for reliability of mobile telecommunication handset Technical requirements and test methods for acoustics performance of digital mobile terminal YD/T 910.21 900/1800MHz TDMA digital cellular mobile telecommunication network radio interface signalling part (Phase 2) YD/T 910.22 900/1800MHz TDMA digital cellular mobile telecommunication network radio interface physical layer part (Phase 2) YD 1032 Limits and measurement methods of electromagnetic compatibility for 900/1800 MHz TDMA digital cellular telecommunications system—Part 1: Mobile station and ancillary equipment ITU-T Recommendations I.240—ISDN service capability—Definition of telecommunication service 3GPP TS 01.61 GPRS ciphering algorithm requirements 3GPP TS 02.60/3 GPP TS 22.060 General Packet Radio Service (GPRS); Service description; Stage 1 3GPP TS 03.03/3 GPP TS 23.003 Numbering, Addressing and Identification 3GPP TS 03.60/3 GPP TS 23.060 General Packet Radio Service (GPRS); Service description; Stage 2 3GPP TS 03.64/3 GPP TS 43.064 General Packet Radio Service (GPRS); Overall description of the GPRS radio interface; Stage 2 3GPP TS 04.04/3 GPP TS 44.004 Layer 1: General Requirements 3GPP TS 04.05/3 GPP TS 44.005 Data Link (DL) Layer: General Requirements 3GPP TS 04.06/3 GPP TS 44.006 Mobile Station - Base Stations System (MS - BSS) Interface Data Link (DL) Layer Specification 3GPP TS 04.07/3 GPP TS 24.007 Mobile radio interface signalling layer 3: General Aspects 3GPP TS 04.08/3 GPPTS 24.008 Mobile radio interface Layer 3 specification 3GPP TS 04.22 Radio Link Protocol (RLP) for data and telematic services on the Mobile Station - Base Station System (MS - BSS) interface and the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface 3GPP TS 04.60/3 GPP TS 44.060 General Packet Radio Service (GPRS); Mobile Station (MS) - Base Station System (BSS) interface; Radio Link Control/ Medium Access Control (RLC/MAC) protocol 3GPP TS 04.64/3 GPPTS 44.064 General Packet Radio Service (GPRS); Mobile Station - Serving GPRS Support Node (MS-SGSN) Logical Link Control (LLC) layer specification 3GPP TS 04.65/3 GPPTS4.065 General Packet Radio Service (GPRS); Mobile Station (MS) - Serving GPRS Support Node (SGSN); Subnetwork Dependent Convergence Protocol (SNDCP) 3GPP TS 05.01/3 GPPTS 45.001 Physical layer on the radio path; General description 3GPP TS 05.02/3 GPP TS 45.002 Multiplexing and Multiple Access on the Radio Path 3GPP TS 05.03/3 GPP TS 45.003 Channel coding 3GPP TS 05.04/3 GPP TS 45.004 Modulation 3GPP TS 05.05/3 GPP TS 45.005 Radio Transmission and Reception 3GPP TS 05.08/3 GPP TS 45.008 Radio subsystem link control 3GPP TS 05.10/3 GPP TS 45.010 Radio subsystem synchronization 3GPP TS 07.60 General Packet Radio Service (GPRS); Mobile Station (MS) supporting GPRS 3GPP TS 24.022 Radio Link Protocol (RLP) for circuit switched bearer and teleservices 3GPP TS 27.060 Packet domain; Mobile Station (MS) supporting Packet Switched services 3GPP TS 11.11 Specification of the Subscriber Identity Module - Mobile Equipment (SIM-ME) Interface 3GPP TS 11.12 Specification of the 3 Volt Subscriber Identity Module - Mobile Equipment (SIM - ME) Interface 3GPP TS 11.18 Specification of the 1.8 Volt Subscriber Identity Module - Mobile Equipment (SIM - ME) Interface 3GPP TS 51.010-1 Mobile Station (MS) conformance specification; Part 1: Conformance specification 3 Abbreviations For the purposes of this standard, the following abbreviations apply. 4 General The logical structure of GPRS network is shown in Figure 1. GPRS system consists of switching subsystem, Base Station Subsystem (BSS) and Mobile Station (MS). GPRS switching subsystem consists of Serving GPRS Support Node (SGSN), Gateway GPRS Support Node (GGSN), Border Gateway (BG), Charging Gateway (CG), MSC/VLR and HLR with GPRS function, etc. GPRS MS can be grouped into three classes according to its ability to support GPRS service and GSM circuit switched service simultaneously. Class A: it supports simultaneous attachment, activation, monitoring, invocation and telecommunication services of GPRS service and GSM circuit switched service. Mobile subscribers can simultaneously initiate/receive calls of packet and circuit services according to quality of service (QoS) requirements. Class B: it supports simultaneous attachment, activation and monitoring of GPRS service and GSM circuit-switched service. However only limited simultaneous calls are supported: GPRS virtual circuit (GPRS activation) is not cleared when calling circuit-switched service and circuit-switched telecommunication, and GPRS virtual circuit is set to "busy or hold" at this time, which does not support simultaneous telecommunication service. Mobile subscribers can initiate/receive calls for packet and circuit services in turn, but not simultaneously. The mobile station automatically selects the appropriate service. Class C: it only supports the non simultaneous attachment of GPRS service and GSM circuit-switched service. If MS supports GPRS service and GSM circuit-switched service, MS in Class C may select (manually or according to default settings) to initiate/receive GPRS service or GSM circuit-switched service, and the unselected service state is deactivated, i.e., unreachable to subscribers.

Contents of YD/T 1214-2006

Foreword i 1 Scope 2 Normative references 3 Abbreviations 4 General 5 Service and functional requirements 5.1 General 5.2 GSM circuit-switched service requirements 5.3 GSM functional requirements 5.4 GPRS MS service requirements 5.5 GPRS MS functional requirements 6 Performance requirements 6.1 Band and channel allocation 6.2 RF performance 6.3 Acoustics performance 7 Interface requirements 7.1 Um interface 7.2 SIM/ME interface 8 Requirements of electromagnetic compatibility (EMC) 9 Requirements of environmental adaptability 10 Requirements of battery and charger 10.1 Battery performance 10.2 The safety of charger 11 Appearance, packaging and assembly Annex A (Normative) Main data stored in GPRS mobile phone Annex B (Normative) Main functional requirements of mobile station