Standard No.:	YD/T 1876-2009
English Name:	Test Methods for 800MHz/2GHz cdma2000 Digital Cellular Mobile Communication Networks - Signaling Conformance Specification for High Rate Packet Data Air Interface (Phase 2)
Chinese Name:	800MHz/2GHz cdma2000数字蜂窝移动通信网测试方法 高速分组数据（HRPD）（第二阶段）空中接口信令一致性
Chinese Classification:	M36    Radio communication equipment
Professional Classification:	YD    Professional Standard - Telecommunication
ICS Classification:	33.060.99 33.060.99    Other equipment for radiocommunications 33.060.99
Source Content Issued by:	Ministry of Industry and Information Technology
Issued on:	2009-6-15
Implemented on:	2009-9-1
Status:	valid
Target Language:	English
File Format:	PDF
Word Count:	42500 words
Translation Price(USD):	1275.0
Delivery:	via email in 1 business day

1 Scope This standard specifies the signaling conformance test content of the 800MHz/2GHz cdma2000 digital cellular mobile communication network high speed packet data (HRPD) (Phase 2) access terminal and access network, including default signaling application, default packet application, flowing protocol, session layer, connection layer, security layer and MAC layer test content. This standard applies to digital cellular mobile telecommunication system of the Phase 2 technology of high rate packet data (HRPD) of 800MHz/2GHz cdma2000 digital cellular mobile communication network. 2 Normative References The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections), or revisions of any of these publications do not applicable to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of these normative documents indicated below. For undated references, the latest edition applies. 3GPP2 C.S0024-A, Version2.0 cdma2000 Technical requirements for Air Interface of High Rate Packet Data 3GPP2 C.S0044-0 v1.0 cdma2000 Interoperability Specification for Air Interface 3 Abbreviations For the purposes of this standard, the following abbreviations apply. AC Access Channel AN Access Network AT Access Terminal ASP Active Set Pilot CDMA Code Division Multiple Access CC Control Channel DH Diffie Hellman DRC Data Rate Control FTC Forward Traffic Channel FTP File Transfer Protocol MAC Medium Access Control NA Not Applicable RAB Reverse Active Bit RATI Random Access Terminal Identifier RTC Reverse Traffic Channel SLP Signaling Link Protocol SLP-F Signaling Link Protocol - Fragmentation SLP-D Signaling Link Protocol - Delivery UATI Unicast Access Terminal Identifier 4 Access Network Test 4.1 Default Signaling Application Tests 4.1.1 Default Signaling Link Protocol Tests 4.1.1.1 SLP Initialization Test 4.1.1.1.1 Definition This test verifies that upon protocol initialization, the access network sets the reliable-delivery SLP-D packet sequence number equal to 0. 4.1.1.1.2 Test procedure a) Instruct the access terminal to set up a connection with the access network. Begin recording at the access terminal SLP-D packets received from the access network. b) Verify that the SequenceNumber field in the SLP-D packet sent by the access network meets the minimum standard as per 4.1.1.1.3. 4.1.1.1.3 Minimum Standard The SequenceNumber field in the first reliable-delivery SLP-D packet sent by the access network during connection establishment shall be 0. 4.1.1.2 SLP-D Sequence Number Increment Tests 4.1.1.2.1 Definition This test verifies that the access network increments the sequence number by 1 for each new reliable-delivery SLP-D packet sent to the access terminal and this sequence number wraps around to 0 after reaching 7. 4.1.1.2.2 Test Procedure 1) Instruct the access terminal to set up a connection with the access network and record at the access terminal the SLP-D packets received from the access network. 2) Instruct the access terminal to send a Default Signaling Application ConfigurationRequest message. 3) Record the reliable delivery SLP-D packets associated with the Default Signaling Application ConfigurationResponse message from the access network. 4) Repeat steps 2) and 3), nine times. 5) Verify that consecutive reliable-delivery SLP-D packets sent by the access network meet the minimum standard as per 4.1.1.2.3. 4.1.1.2.3 Minimum Standard The access network shall increment the SequenceNumber field in the header of consecutive reliable-delivery SLP-D packets by 1 mod 8 as defined in 14.6 of 3GPP2C.S0024-A. 4.1.1.3 Reliable-Delivery SLP-D Packet Acknowledgment Test 4.1.1.3.1 Definition

Foreword i 1 Scope 2 Normative References 3 Abbreviations 4 Access Network Test 4.1 Default Signaling Application Tests 4.2 Default Packet Application Tests 4.3 Multi-flow Application Protocol Tests 4.4 Enhanced Multi-flow Packet Application Test 4.5 Stream Layer Protocol Test 4.6 Session Layer Tests 4.7 Connection Layer Tests 4.8 Security Layer Tests 4.9 MAC Layer Tests 4.10 Physical Layer Tests 5 Access Terminal Tests 5.1 Default Signaling Application Tests 5.2 Default Packet Application Tests 5.3 Multi-flow Application Protocol Tests 5.4 Enhanced Multi-flow Packet Application Tests 5.5 Stream Layer Protocol Tests 5.6 Session Layer Tests 5.7 Connection Layer Tests 5.8 Security Layer Tests 5.9 MAC Layer Tests 5.10 Physical Layer Tests