YD/T 839.4-2014 Filling compounds and flooding compounds for telecommunication cable and optical fibre cable Part 1:Flooding compounds (English Version)
1 Scope
This part specifies the product classification, requirements, inspection rules and test methods, packaging, marking, transport and storage for flooding compounds for telecommunication cable and optical fibre cable.
This part is applicable to compounds flooded into the gap of the protection layer of telecommunication cable and optical fibre cable.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 325.2-2010 Packaging container - Steel drums - Part 2: Removable head (open head) drums with a minimum total capacity of 208 L, 210 L and 216.5 L
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999, IDT)
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)
GB/T 13508-2011 Polyethylene blown containers
YD/T 839.1-2014 Filling compounds and flooding compounds for telecommunication cable and optical fibre cable - Part 1: Test method
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
flooding compounds
compounds flooded between components of the protection layer (e.g., sheath layer, armor layer, shield layer, etc.) of telecommunication cable and optical fibre cable or between the sheath and the cable core cladding, to prevent water or other fluids from entering or migrating into the cable core
3.2
cold-application flooding compounds
flooding compounds that can be applied without heating
3.3
hot-application flooding compounds
flooding compounds that needs to be heated into melt before use
3.4
waterproof flooding compounds
flooding compounds made of certain nonabsorbent materials
3.5
absorbent flooding compounds
flooding compounds made by adding a certain amount of water-absorbent materials into the waterproof flooding compounds
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Product classification
4.1 General
4.2 Model and name
4.3 Product labeling
5 Requirements
5.1 General requirements
5.2 Chemical components
5.3 Physical properties
5.4 Environmental protection property
5.5 Material compatibility
6 Inspection rules and test methods
6.1 General
6.2 Term restrictions
6.3 End-of-manufacturing inspection
6.4 Type inspection
7 Packaging, marking, transport and storage
7.1 Packaging
7.2 Marking
7.3 Transport
7.4 Storage
Standard
YD/T 839.4-2014 Filling compounds and flooding compounds for telecommunication cable and optical fibre cable Part 1:Flooding compounds (English Version)
Standard No.
YD/T 839.4-2014
Status
valid
Language
English
File Format
PDF
Word Count
5500 words
Price(USD)
130.0
Implemented on
2014-10-14
Delivery
via email in 1 business day
Detail of YD/T 839.4-2014
Standard No.
YD/T 839.4-2014
English Name
Filling compounds and flooding compounds for telecommunication cable and optical fibre cable Part 1:Flooding compounds
1 Scope
This part specifies the product classification, requirements, inspection rules and test methods, packaging, marking, transport and storage for flooding compounds for telecommunication cable and optical fibre cable.
This part is applicable to compounds flooded into the gap of the protection layer of telecommunication cable and optical fibre cable.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 325.2-2010 Packaging container - Steel drums - Part 2: Removable head (open head) drums with a minimum total capacity of 208 L, 210 L and 216.5 L
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999, IDT)
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)
GB/T 13508-2011 Polyethylene blown containers
YD/T 839.1-2014 Filling compounds and flooding compounds for telecommunication cable and optical fibre cable - Part 1: Test method
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
flooding compounds
compounds flooded between components of the protection layer (e.g., sheath layer, armor layer, shield layer, etc.) of telecommunication cable and optical fibre cable or between the sheath and the cable core cladding, to prevent water or other fluids from entering or migrating into the cable core
3.2
cold-application flooding compounds
flooding compounds that can be applied without heating
3.3
hot-application flooding compounds
flooding compounds that needs to be heated into melt before use
3.4
waterproof flooding compounds
flooding compounds made of certain nonabsorbent materials
3.5
absorbent flooding compounds
flooding compounds made by adding a certain amount of water-absorbent materials into the waterproof flooding compounds
Contents of YD/T 839.4-2014
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Product classification
4.1 General
4.2 Model and name
4.3 Product labeling
5 Requirements
5.1 General requirements
5.2 Chemical components
5.3 Physical properties
5.4 Environmental protection property
5.5 Material compatibility
6 Inspection rules and test methods
6.1 General
6.2 Term restrictions
6.3 End-of-manufacturing inspection
6.4 Type inspection
7 Packaging, marking, transport and storage
7.1 Packaging
7.2 Marking
7.3 Transport
7.4 Storage
