Accessory devices for sterile single-use intravascular catheters - Part 2: Obturators for over-needle peripheral catheters English
1 Scope
This part of YY 0450 specifies requirements for obturators, supplied in the sterile condition and intended for single use for plugging over-needle peripheral catheters.
Note: Attention is drawn to YY 0285.5, which specifies requirements for over-needle peripheral catheters.
2 Normative references
The following normative documents contain provisions which, through reference of YY 0450, constitute provisions of this part. For dated reference, subsequent amendments to (excluding correction), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest editions apply to this part.
GB/T 1962.1 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirement (GB/T 1962.1-2001; idt ISO 594-1: 1986)
GB/T 1962.2 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 2: Lock fittings (GB/T 1962.2-2001; idt ISO 594-2: 1998)
3 Definitions
For the purposes of this part, the following terms and definitions apply.
3.1
obturator
device designed to be inserted into an over-needle peripheral catheter to plug the lumen of the catheter
See figure 1.
1—— Outside diameter;
2——Tip;
3——Effective length;
4——Luer fitting (locking fitting shown);
5——Obturator shaft.
Figure 1 Example of obturator
Foreword I
1 Scope
2 Normative references
3 Definitions
4 Requirements
Annex A (Normative) Method for determining force at break of the obturator
Annex B (Informative) Bibliography
Standard
YY 0450.2-2003 Accessory devices for sterile single-use intravascular catheters - Part 2: Obturators for over-needle peripheral catheters (English Version)
Standard No.
YY 0450.2-2003
Status
valid
Language
English
File Format
PDF
Word Count
3000 words
Price(USD)
80.0
Implemented on
2003-9-1
Delivery
via email in 1 business day
Detail of YY 0450.2-2003
Standard No.
YY 0450.2-2003
English Name
Accessory devices for sterile single-use intravascular catheters - Part 2: Obturators for over-needle peripheral catheters
Accessory devices for sterile single-use intravascular catheters - Part 2: Obturators for over-needle peripheral catheters English
1 Scope
This part of YY 0450 specifies requirements for obturators, supplied in the sterile condition and intended for single use for plugging over-needle peripheral catheters.
Note: Attention is drawn to YY 0285.5, which specifies requirements for over-needle peripheral catheters.
2 Normative references
The following normative documents contain provisions which, through reference of YY 0450, constitute provisions of this part. For dated reference, subsequent amendments to (excluding correction), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest editions apply to this part.
GB/T 1962.1 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirement (GB/T 1962.1-2001; idt ISO 594-1: 1986)
GB/T 1962.2 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 2: Lock fittings (GB/T 1962.2-2001; idt ISO 594-2: 1998)
3 Definitions
For the purposes of this part, the following terms and definitions apply.
3.1
obturator
device designed to be inserted into an over-needle peripheral catheter to plug the lumen of the catheter
See figure 1.
1—— Outside diameter;
2——Tip;
3——Effective length;
4——Luer fitting (locking fitting shown);
5——Obturator shaft.
Figure 1 Example of obturator
Contents of YY 0450.2-2003
Foreword I
1 Scope
2 Normative references
3 Definitions
4 Requirements
Annex A (Normative) Method for determining force at break of the obturator
Annex B (Informative) Bibliography
