1 Scope
This standard specifies the product classifications, inspection requirements, inspection contents, inspection methods and inspection rules with regards to multi-rope friction hoist for coal mines (hereinafter referred to as "hoist").
This standard is applicable to hoists on the coal mine ground used for hoisting mineral, personnel, materials and equipment with a vertical shaft.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classifications
5 Inspection Requirements
6 Inspection Contents
7 Inspection Methods
8 Inspection Rules
Appendix A Recommended Basic Parameters and Dimensions for Multi-rope Friction Hoist (Informative)
AQ 1036-2007 Safety inspection code of multi-rope friction hoist for coal mines (English Version)
Standard No.
AQ 1036-2007
Status
valid
Language
English
File Format
PDF
Word Count
8000 words
Price(USD)
200.0
Implemented on
2007-4-1
Delivery
via email in 1 business day
Detail of AQ 1036-2007
Standard No.
AQ 1036-2007
English Name
Safety inspection code of multi-rope friction hoist for coal mines
Chinese Name
煤矿用多绳摩擦式提升绞车安全检验规范
Chinese Classification
D04
Professional Classification
AQ
ICS Classification
Issued by
State Administration of Work Safety
Issued on
2007-01-04
Implemented on
2007-4-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
Language
English
File Format
PDF
Word Count
8000 words
Price(USD)
200.0
Keywords
AQ 1036-2007, AQ/T 1036-2007, AQT 1036-2007, AQ1036-2007, AQ 1036, AQ1036, AQ/T1036-2007, AQ/T 1036, AQ/T1036, AQT1036-2007, AQT 1036, AQT1036
Introduction of AQ 1036-2007
1 Scope
This standard specifies the product classifications, inspection requirements, inspection contents, inspection methods and inspection rules with regards to multi-rope friction hoist for coal mines (hereinafter referred to as "hoist").
This standard is applicable to hoists on the coal mine ground used for hoisting mineral, personnel, materials and equipment with a vertical shaft.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Contents of AQ 1036-2007
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classifications
5 Inspection Requirements
6 Inspection Contents
7 Inspection Methods
8 Inspection Rules
Appendix A Recommended Basic Parameters and Dimensions for Multi-rope Friction Hoist (Informative)
