This standard defines technical principles to help designers in achieving safety in the design of machinery.
GB/T 15706.2 is intended to be used together with GB/T 15706.1 when considering the solution to a specific problem. The two parts of GB/T 15706 can be used independently of other documents or as a basis for the preparation of other type-A standards or type-B or -C standards.
This standard does not deal with damage to domestic animals, property or the environment.
2 Normative references
The following standards contain provisions which, through reference in this Part of 15706, constitute provisions of this part. For dated references, all subsequent modification or revision (excluding correction contents) are not applicable to this Part. However, all concerned Parties are encouraged to study if the latest editions of these documents can be applied. For undated references, the latest editions of the normative documents are applicable to this Part.
GB 5226.1-2002 Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1: 2000, IDT)
GB/T 15706.1-2007 Safety of machinery – Basic concepts, general principles for design – Basic terminology, methodology (ISO 12100-1: 2003, IDT)
3 Terms and definitions
For the purposes of this International Standard, the terms and definitions given in GB/T 15706.1-2007 apply.
4 Inherently safe design measures
4.1 General
Inherently safe design measures are the first and most important step in the risk reduction process because protective measures inherent to the characteristics of the machine are likely to remain effective, whereas experience has shown that even well-designed safeguarding may fail or be violated and information for use may not be followed.
Inherently safe design measures are achieved by avoiding hazards or reducing risks by a suitable choice of design features of the machine itself and/or interaction between the exposed persons and the machine.
1 Scope 2 Normative references 3 Terms and definitions 4 Inherently safe design measures 5 Safeguarding and complementary protective measures 6 Information for use Bibliography
1 Scope
This standard defines technical principles to help designers in achieving safety in the design of machinery.
GB/T 15706.2 is intended to be used together with GB/T 15706.1 when considering the solution to a specific problem. The two parts of GB/T 15706 can be used independently of other documents or as a basis for the preparation of other type-A standards or type-B or -C standards.
This standard does not deal with damage to domestic animals, property or the environment.
2 Normative references
The following standards contain provisions which, through reference in this Part of 15706, constitute provisions of this part. For dated references, all subsequent modification or revision (excluding correction contents) are not applicable to this Part. However, all concerned Parties are encouraged to study if the latest editions of these documents can be applied. For undated references, the latest editions of the normative documents are applicable to this Part.
GB 5226.1-2002 Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1: 2000, IDT)
GB/T 15706.1-2007 Safety of machinery – Basic concepts, general principles for design – Basic terminology, methodology (ISO 12100-1: 2003, IDT)
3 Terms and definitions
For the purposes of this International Standard, the terms and definitions given in GB/T 15706.1-2007 apply.
4 Inherently safe design measures
4.1 General
Inherently safe design measures are the first and most important step in the risk reduction process because protective measures inherent to the characteristics of the machine are likely to remain effective, whereas experience has shown that even well-designed safeguarding may fail or be violated and information for use may not be followed.
Inherently safe design measures are achieved by avoiding hazards or reducing risks by a suitable choice of design features of the machine itself and/or interaction between the exposed persons and the machine.
Contents of GB/T 15706.2-2007
1 Scope
2 Normative references
3 Terms and definitions
4 Inherently safe design measures
5 Safeguarding and complementary protective measures
6 Information for use
Bibliography
