This standard specifies the basic rules for checking the constructed, renovated and extended painting engineering (including painting equipment and machinery) and safety facilities in workplace.
This standard is applicable to the checking of painting engineering on metallic or non-metallic surface by with paint and relevant chemicals (including organic solvent) and the checking of safety facilities for painting engineering on non-metallic surfaces of plastic products, textiles, leathers and timbers etc..
This standard may also be referred with regard to technical review on safety of painting process, painting location and design, production, fabrication and installation of painting equipment and machinery, painting in the open air, and interior and exterior overcoating for buildings and structures etc..
Foreword I 1. Scope 2. Normative References 3. Terms and Definitions 4. General Requirements 5. General Layout 6. Safety of Painting Equipment 7. Fire and Explosion Prevention 8. Electrical Safety 9. Lightning Protection and Electrostatic Prevention 10. Requirements for Control of Occupational Hazards 11. Other Matters Related to Acceptance
AQ 5201-2007 Checking code for painting engineering safety device (English Version)
Standard No.
AQ 5201-2007
Status
valid
Language
English
File Format
PDF
Word Count
4000 words
Price(USD)
100.0
Implemented on
2007-4-1
Delivery
via email in 1 business day
Detail of AQ 5201-2007
Standard No.
AQ 5201-2007
English Name
Checking code for painting engineering safety device
Chinese Name
涂装工程安全设施验收规范
Chinese Classification
G08
Professional Classification
AQ
ICS Classification
Issued by
State Administration of Work Safety
Issued on
2007-01-04
Implemented on
2007-4-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
Language
English
File Format
PDF
Word Count
4000 words
Price(USD)
100.0
Keywords
AQ 5201-2007, AQ/T 5201-2007, AQT 5201-2007, AQ5201-2007, AQ 5201, AQ5201, AQ/T5201-2007, AQ/T 5201, AQ/T5201, AQT5201-2007, AQT 5201, AQT5201
Introduction of AQ 5201-2007
This standard specifies the basic rules for checking the constructed, renovated and extended painting engineering (including painting equipment and machinery) and safety facilities in workplace.
This standard is applicable to the checking of painting engineering on metallic or non-metallic surface by with paint and relevant chemicals (including organic solvent) and the checking of safety facilities for painting engineering on non-metallic surfaces of plastic products, textiles, leathers and timbers etc..
This standard may also be referred with regard to technical review on safety of painting process, painting location and design, production, fabrication and installation of painting equipment and machinery, painting in the open air, and interior and exterior overcoating for buildings and structures etc..
Contents of AQ 5201-2007
Foreword I
1. Scope
2. Normative References
3. Terms and Definitions
4. General Requirements
5. General Layout
6. Safety of Painting Equipment
7. Fire and Explosion Prevention
8. Electrical Safety
9. Lightning Protection and Electrostatic Prevention
10. Requirements for Control of Occupational Hazards
11. Other Matters Related to Acceptance
