Detail of CJ/T 459-2014

Introduction of CJ/T 459-2014

1 Scope This standard specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transport, storage and accompanying documents of the snow plow. This standard is applicable to snow plows mounted on vehicles, construction machinery and other traveling equipment to remove snow. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 191 Packaging - Pictorial marking for handling of goods GB/T 3766 Hydraulic fluid power - General rules relating to systems GB 4208 Degrees of protection provided by enclosure (IP code) GB/T 6544 Corrugated fiberboard GB/T 12464 Wooden boxes GB/T 13306 Plates GB/T 16471 Dimensional and weight constraints for transport package JB/T 5943 Engineering machinery - General technical specifications for weldments JB/T 5946 Engineering machinery - General technical specifications for paint coating 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 snow plow a plow-shaped device used for removing snow on roads, which is an assembly consisting of a scraper blade, a blade, a connecting bracket, a hydraulic control system, an electric control system and the like 3.2 front-mounted snow plow snow plow installed in front of the traveling equipment such as vehicles and construction machinery [see Figure 1a)]

Contents of CJ/T 459-2014

Foreword 1 Scope 2 Normative references 3 Terms and definitions 4 Requirements 5 Test methods 6 Inspection rules 7 Marking, packaging, transport, storage, and accompanying documents Annex A (Normative) Test reports Annex B (Informative) Classification of road ice and snow Annex C (Normative) Failure classification