Detail of FZ/T 81012-2006

Introduction of FZ/T 81012-2006

1 Scope This standard specifies the requirements of scarf and shawl, and all the technical requirements such as test methods, inspection rules, marking, packaging, transportation and storage. This standard is applicable to the scarf and shawl products with textile woven fabrics (silk fabrics are excluded) as the major raw materials. 2 Normative Reference The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending error in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies. GB 250 Gray scale for assessing change in colour GB/T 2910 Textile--Binary fibre mixtures--Quantitative chemical analysis GB/T 2911 Textiles--Ternary fibre mixtures--Quantitative analysis GB/T 2912.1 Textiles--Determination of Formaldehyde -- Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method) GB/T 3917.2 Textiles--Tear properties of fabrics--Part 2: Determination of tear force of tongue shaped test specimens GB/T 3920 Textiles-Tests for colour fastness-Colour fastness to rubbing GB/T 3921.1 Textiles--Tests for colour fastness--Colour fastness to washing: Test 1 GB/T 3921.3 Textiles--Tests for colour fastness to washing: Test 3 GB/T 3922 Textiles--Testing method for colour fastness to perspiration GB/T 4841.6 Colour cards of standard depths for dyeing with dyestuffs 1/12 GB 5296. 4 Instructions for use of products of consumer interest--Instructions for use of textiles and apparel GB/T 5711 Textiles-Tests for colour fastness-Colour fastness to dry cleaning GB/T 5713 Textiles-Tests for colour fastness-Colour fastness to water GB/T 7573 Textiles--Determination of pH of the aqueous extract GB/T 8170 Rules for Rounding off of Numerical Values GB/T 8427-1998 Textiles-Tests for colour fastness Colour fastness to artificial light: Xenon arc fading lamp test GB/T 8628 Textiles-Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change GB/T 8629-2001 Textiles-Domestic washing and drying procedures for textile testing GB/T 8630 Textiles-Determination of Dimensional Change in Washing and Drying GB/T 14801 Test method for skewness and bow in woven and knitted fabrics GB/T 17592.1 Textiles--Test method of the use of banned azo colourants--Gas chromatography/mass spectrography method GB 18401-2003 National General Safety Technical Code for Textile Products GB/T 18886 Textiles-Tests for Fastness-Colour Fastness to Saliva FZ/T 01013 Textiles-determination of the dimensional change of dry cleaning of perchloroethylene FZ/T 01026 Textile--Quaternary fibre mixtures--Quantitative chemical analysis FZ/T 01053 Textiles-Designation of fiber content FZ/T 01057(all parts) Test method for identification of textile fibres FZ/T 80002 Marking, packaging transpiration and storage for garments FZ/T 80004 Rule for garments delivery inspection 3 Requirements 3.1 Instructions for use The instructions for use of finished products shall comply with the requirements of GB 5296.4 and GB 18401. Thereinto, the appearance physical dimension of the finished product shall be marked in cm. 3.2 Specification 3.2.1 The specification of finished product may be arranged by the enterprise itself according to the users' need, the content may include the type specification of the shell fabric selected, pattern design, physical dimension etc. The specification of finished products shall be subject to the design sheets confirmed by the both parties or the standard sample of physical product. 3.2.2 The allowable degree of size of finished product shall meet the requirements of Table 1.

Contents of FZ/T 81012-2006

Foreword 1 Scope 2 Normative Reference 3 Requirements 3.1 Instructions for use 3.2 Specification 3.3 Colour difference 3.4 Appearance defects 3.5 Sewing 3.6 Ironing 3.7 Physical chemical properties 4 Inspection Methods 4.1 Appearance quality inspection method 4.2 Testing method for physical chemical properties 5 Inspection Rules 5.1 Inspection classification 5.2 Quality grade and defect classification rules 5.3 Sampling requirements 5.4 Determination rules 5.5 Determination of inspection results 5.6 Reinspection rules 6 Marking, Packaging, Transportation and Storage