This standard specifies the definition, general requirements, requirements, test methods, inspection rules and marks of automatic control system for fire protection.
This standard is applicable to the automatic control system for fire protection and various equipments thereof used for installation in general industry and civil buildings, including automatic controller for fire protection, gas fire extinguishing controller, electric fire control unit, emergency power supply for fire fighting equipment, fire emergency broadcasting equipment, fire telephone, transmission equipment, graphic display unit in fire protection control room, module, electric fire device and fire hydrant button.
As for the automatic control system for fire protection and various equipments thereof with special performance used and installed in other environments, except the special requirements which are specified by relevant standards, this standard shall also be implemented.
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 General Requirements
4.1 General Requirements of Automatic Control System for Fire Protection
4.2 Automatic Controller for Fire Protection
4.3 Gas Fire Extinguishing Controller
4.4 Electric Fire Control Unit
4.5 Emergency Power Supply for Fire Fighting Equipment
4.6 Fire Emergency Broadcasting Equipment
4.7 Fire Telephone
4.8 Transmission Equipment
4.9 Graphic Display Unit in Fire Protection Control Room
4.10 Module
4.11 Electric fire device
4.12 Fire Hydrant Button
5 Requirements and Test Method
5.1 General Provisions
5.2 Basic performance tests of automatic controller for fire protection
5.3 Basic performance tests of gas fire extinguishing controller
5.4 Basic performance tests of electric fire control unit
5.5 Basic performance tests of fire-fighting emergency power supply
5.6 Basic performance tests of fire emergency broadcasting equipment
5.7 Basic performance tests of fire telephone
5.8 Basic performance tests of transmission equipment
5.9 Basic performance tests of graphic display unit in fire protection control room
5.10 Basic function test of modules
5.11 Basic performance tests of electric fire device
5.12 Basic performance tests of fire hydrant button
5.13 Insulation resistance test
5.14 Leakage current test
5.15 Electric strength test
5.16 Radio frequency electromagnetic field radiation immunity test
5.17 Radio-frequency field inductive conduction disturbances immunity test
5.18 Electrostatic discharge immunity test
5.19 Electrical fast transient burst immunity test
5.20 Surging (impact) immunity test
5.21 Power supply transient test
5.22 Immunity test of voltage dip, short interruption and voltage change
5.23 Low temperature (operation) test
5.24 Constant moist heat (operation) test
5.25 Constant moist heat (durable) test
5.26 Vibration (sine)(operation) test
5.27 Vibration (sine) (durable) experiment
5.28 Impact test
5.29 Shock test
5.30 Rain drop test
5.31 High temperature (operation) test
5.32 Alternating moist heat (operation) test
5.33 SO2 corrosion (durable) test
6 Test Rules
7 Marking
Appendix A (Normative) Electromagnetic Performance Requirements
This standard specifies the definition, general requirements, requirements, test methods, inspection rules and marks of automatic control system for fire protection.
This standard is applicable to the automatic control system for fire protection and various equipments thereof used for installation in general industry and civil buildings, including automatic controller for fire protection, gas fire extinguishing controller, electric fire control unit, emergency power supply for fire fighting equipment, fire emergency broadcasting equipment, fire telephone, transmission equipment, graphic display unit in fire protection control room, module, electric fire device and fire hydrant button.
As for the automatic control system for fire protection and various equipments thereof with special performance used and installed in other environments, except the special requirements which are specified by relevant standards, this standard shall also be implemented.
Contents of GB 16806-2006
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 General Requirements
4.1 General Requirements of Automatic Control System for Fire Protection
4.2 Automatic Controller for Fire Protection
4.3 Gas Fire Extinguishing Controller
4.4 Electric Fire Control Unit
4.5 Emergency Power Supply for Fire Fighting Equipment
4.6 Fire Emergency Broadcasting Equipment
4.7 Fire Telephone
4.8 Transmission Equipment
4.9 Graphic Display Unit in Fire Protection Control Room
4.10 Module
4.11 Electric fire device
4.12 Fire Hydrant Button
5 Requirements and Test Method
5.1 General Provisions
5.2 Basic performance tests of automatic controller for fire protection
5.3 Basic performance tests of gas fire extinguishing controller
5.4 Basic performance tests of electric fire control unit
5.5 Basic performance tests of fire-fighting emergency power supply
5.6 Basic performance tests of fire emergency broadcasting equipment
5.7 Basic performance tests of fire telephone
5.8 Basic performance tests of transmission equipment
5.9 Basic performance tests of graphic display unit in fire protection control room
5.10 Basic function test of modules
5.11 Basic performance tests of electric fire device
5.12 Basic performance tests of fire hydrant button
5.13 Insulation resistance test
5.14 Leakage current test
5.15 Electric strength test
5.16 Radio frequency electromagnetic field radiation immunity test
5.17 Radio-frequency field inductive conduction disturbances immunity test
5.18 Electrostatic discharge immunity test
5.19 Electrical fast transient burst immunity test
5.20 Surging (impact) immunity test
5.21 Power supply transient test
5.22 Immunity test of voltage dip, short interruption and voltage change
5.23 Low temperature (operation) test
5.24 Constant moist heat (operation) test
5.25 Constant moist heat (durable) test
5.26 Vibration (sine)(operation) test
5.27 Vibration (sine) (durable) experiment
5.28 Impact test
5.29 Shock test
5.30 Rain drop test
5.31 High temperature (operation) test
5.32 Alternating moist heat (operation) test
5.33 SO2 corrosion (durable) test
6 Test Rules
7 Marking
Appendix A (Normative) Electromagnetic Performance Requirements