Detail of GB 21861-2014

Introduction of GB 21861-2014

1 Scope This standard specifies the inspection items, inspection methods, inspection requirements and handling of inspection result for motor vehicles safety technology inspection. This standard is applicable to the technical safety inspection performed by motor vehicles safety technology inspection body, as well as to the safety technology inspection on inbound motor vehicles performed by entry-exit inspection and quarantine body. Motor vehicles approved to have practical road test and those temporarily inbound may have safety technology inspection by reference to this standard. This standard is not applicable to safety technology inspection of the tractor that runs on road, e.g. tractor towing trailer for transportation. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB 1589 Limits of Dimensions, Axle Load and Masses for Road Vehicles GB/T 3730.2 Road Vehicle - Masses - Vocabulary and Codes GB/T 3730.3 Motor Vehicles and Towed Vehicles - Dimensions of Vehicles - Terms and Definitions GB 4785 Prescription for Installation of the External Lighting and Light-signaling Devices for Motor Vehicles and Their Trailers GB 7258-2012 Safety Specifications for Motor Vehicles Operating on Roads GB 11567.1 Motor Vehicles and Trailers – Lateral Protection Requirements GB 11567.2 Motor Vehicles and Trailers – Rear Underrun Protection Requirements GB 13094 The Safety Requirements for Bus Construction GB 13392 The Vehicle Mark for Road Transportation Dangerous Goods GB 16735 Road Vehicles - Vehicle Identification Number (VIN) GB/T 17676 Natural Gas Vehicle and Liquefied Petroleum Gas Vehicle - Identification Marks GB 18564.1 Road Tanker for Dangerous Liquid Goods Transportation - Part 1:Technical Requirements of Atmospheric Pressure Metal Tank GB 18986 The Safety Requirements for Light Bus Construction GB/T 19056 Vehicle Travelling Data Recorder GB 19151 Triangular Warning Board Used for Power-driven Vehicles GB 20300 Safety Specifications for Road Transportation Vehicle of Explosive Substance and Chemical Toxic Substance GB 24315 The Marker for School Bus GB 24407 The Safety Technique Specifications of Special School GB 25990 Rear-marking Plates for Vehicles and their Trailers GB/T 26765 Specifications for Power-driven Vehicle Safety Inspection Business Information System and Networking GA 36 License Plate of Motor Vehicle of the People's Republic of China GA 802 Types of Motor Vehicle-Terms and Definitions GA 804 Special Fixing Device for License Plate of Motor Vehicle GA 1186 General Technical Specifications for Monitoring System of Vehicle Safety Inspection 3 Terms and Definitions For the purposes of this document, the terms and definitions given in GB 7258 and GA 802 as well as the following ones apply. 3.1 Inspection for unregistered vehicle Safety technology inspection on the motor vehicle applying for registration, performed by motor vehicles safety technology inspection body.

Contents of GB 21861-2014

Foreword i Introduction iv 1 Scope 2 Normative References 3 Terms and Definitions 4 Inspection Items 5 Inspection Methods 6 Inspection Requirements 7 Treatment of Inspection Results 8 Requirements for the Implementation of This Standard during Transition Period Appendix A (Normative) Overall Dimension Measurement Appendix B (Normative) Kerb Weight Measurement Appendix C (Normative) Braking Performance Inspection Appendix D (Normative) Headlamp Inspection Appendix E (Normative) Inspection of Indication Error of Speedometer Appendix F (Normative) Inspection of Horizontal Side Slip of Steering Wheel Appendix G (Normative) Motor Vehicle Safety Technology Inspection Report (Template) Appendix H (Normative) Motor Vehicle Safety Technology Inspection Table (Manual Inspection) Appendix I (Normative) Motor Vehicle Safety Technology Inspection Table (Instrumentation Inspection) Bibliography